TechKnow

Author Topic: [ANDROID HACKING TOOL] Uberizer v1.8 29DEC2013  (Read 28147 times)

0 Members and 1 Guest are viewing this topic.

Offline HcH

  • TechKnow Owner, Ethical Hacker
  • Administrator
  • Uber Member
  • *****
  • Posts: 9946
  • Karma: +2285/-111
[ANDROID HACKING TOOL] Uberizer v1.8 29DEC2013
« on: December 26, 2013, 09:07:51 PM »
Uberizer v1.8 by HcH [www.TechKnow.me]
___________________________________________________________________________
.|ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ|.
||ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ||
||ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ           ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ||
||ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ                             ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ||
||ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ                                          ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ||
||ÛÛÛÛÛÛÛÛÛÛÛ                                                     ÛÛÛÛÛÛÛÛÛÛÛ||
||ÛÛÛÛÛÛÛ                        _____________                        ÛÛÛÛÛÛÛ||
||ÛÛÛÛ                         .'             '.                         ÛÛÛÛ||
||ÛÛ                          /                 \                          ÛÛ||
||Û                            /',           ,'\                            Û||
||                             |  '         '  |                             ||
||          Uberizer           |   '.     .'   |          TechKnow           ||
||                              --___'   '___--                              ||
||                           .         _         .                           ||
||                           :        /_\        :                           ||
||                           "'        "        '"                           ||
||                           "'""    .___.    ""'"                           ||
||                             "'   /_____\   '"                             ||
||                             "  .         .  "                             ||
||                             :  :         :  :                             ||
||                                "'       '"                                ||
||                                "'""   ""'"                                ||
||                                  "'   '"                                  ||
||                                  "     "                                  ||
||                                  :     :                                  ||
||                                                                           ||
||Û                       >!< DON'T HURT THE NERD >!<                       Û||
||ÛÛ                                                                       ÛÛ||
||ÛÛÛÛ                        HcH[HardcoreHacker]                        ÛÛÛÛ||
||ÛÛÛÛÛÛÛÛ                                                           ÛÛÛÛÛÛÛÛ||
||ÛÛÛÛÛÛÛÛÛÛÛÛ                    -presents-                     ÛÛÛÛÛÛÛÛÛÛÛÛ||
||ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ                                        ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ||
||ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ                           ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ||
||ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ           ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ||
||ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ||
||ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ            ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ||
||ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ                             ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ||
||ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ                                          ÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛ||
||ÛÛÛÛÛÛÛÛÛÛÛ                                                     ÛÛÛÛÛÛÛÛÛÛÛ||
||ÛÛÛÛÛÛÛ                                                             ÛÛÛÛÛÛÛ||
||ÛÛÛÛ                                                                   ÛÛÛÛ||
||ÛÛ                                                                       ÛÛ||
||Û                        \                        /                       Û||
|  ________________________/\    Uberizer v1.8     /\_______________________  |
.'                        /                          \                      '.
| /T=---------------------------------=T=---------------------------------=T\ |
|| | .RLS.Date. : 26/DEC/2013          |   ..Language.. : English          | ||
|| | ....OS.... : WinALL               |   .Protection. : Does not apply   | ||
|| | ...Type... : Android Manager      |   ...Hacker... : HcH              | ||
| \I=---------------------------------=I=---------------------------------=I/ |
[  ]                                                                       [  ]
 /                                                                           \
|  INFO:                                                                      |
|| Uberizer is a tool to manage Android devices:                             ||
|| connect, backup, control, debug, unlock full play store, mod, optimize,   ||
|| personalise, root, monitor, improve, and many more features! In total,    ||
|| Uberizer offers 189 functions to mod/hack/optimize Android devices and    ||
|| even Android apps!                                                        ||
| \                                                                         / |
[  ]                                                                       [  ]
 /                                                                           \
|                                                                             |
|                                                                             |
:                                                                             :
::                                                                           ::
'"  _____________________________________________________________<CRAPASCII> '"
]| /                                                                       \ |[
||/                                                                         \||
|/                                                                           \|
:                                                                             :



Uberizer v1.8 by HcH [www.TechKnow.me]

This tool aims to support many android devices. Use the Uberizer to:
* connect
* improve
* backup
* control
* debug
* unlock full play store
* mod
* optimize
* personalise
* root
* and more!


Uberizer Quickstart Guide:
Connecting your device to your computer:

To get started using the Uberizer you will need to connect to your computer. This can be done 2 ways:
* Wireless (RECOMMENDED) (REQUIRES ROOT!)
* Wired (Advanced users only) (This method can ROOT devices which aren't rooted)

The reason why wireless is recommend is because it's easy! Wired installation requires you to install
the ADB driver which can sometimes have problems, some devices have wierd ADB ports so you will have
problems finding the proper cable for it and some devices don't have ADB ports at all.

** Setting up your device for Wireless Uberizing (RECOMMENDED)

1. Go to the Wireless Menu (w)
2. Enable Wireless ADB using ONE of these options: 2, 4 or 5, whichever is most easy for your situation.
3. If you use an app (4 or 5), start the app on your Android device.
   Use option 6 to connect to the given IP in the app.
   If you chose option 2, you must find your device IP, go to Settings, About device, Status, to see the IP.

** Setting up your device for Wired Uberizing (Advanced users only)

1. Install ADB drivers (from dir usb_driver) for wired ADB
2. Boot Android, connect device (on the device, the statusbar will display "usb debugging mode is activated")
3. Run this tool, analyse device so this tool can seek info of your device
   and will check if your model is supported by mods

NOTE: Your device must have "ADB Debugging" checked in: "Settings \ Developer options \ USB debugging (Debug mode when USB is connected)"


Download:
Uberizer_v1.8_29DEC2013_Setup_[www.TechKnow.me] 86.6MB


Uberizer main menu overview:
 a. Analyse / detect device
 b. Build Menu
 c. Root Menu
 d. Backup Menu
 e. Bootanimation Menu
 f. Multi Mod Tool Menu
 g. Application Manager Menu
 h. Help me
 i. AllWinner Firmware Menu
 j. Google Play Store Menu
 k. Various Menu
 l. Files to SD
 m. Donate to TechKnow
 o. Open Uberizer directory
 p. WiKey, PC Keyboard to Android Device
 q. Quit
 r. Reboot device
 s. System analyzer
 t. Install TechKnow ToolKit to device
 u. Update Uberizer
 w. Wireless Uberizer mode
 v. MediaManager
 x. Install Virtual OldPC 95 to device
 z. ZDiR


Uberizer main menu details:
a. Analyse device (find model)
 - Rescans for a device, use this after connecting another android device to your computer.

b. Build Menu                             
 + 1.Auto Mod build.prop               
   * Automatically adds several build.prop tweaks and enhancements.
 + 2.Edit build.prop and push it back   
   * A handy way to quickly check or edit a few build properties.
 + 3.Market build.prop fixes           
   * Strips out the current market fingerprint and copies the modded build.prop to the
     device. Currently this emulates a Samsung for full market (Google Play) access.
 + 4.Backup current build.prop on device
   * Dumps a copy of your build.prop to \backups, the prop dump name includes your model
     name, the current date and time of dump. To easily restore these backups, run 5.
 + 5.Restore a build.prop backup
   * Indexes all backupped build.prop files on the system and allows the user to chose
     which file (s)he wants to restore on the tablet.

c. Root Menu
 + 1.Android 1.6 Donut (tested on WM8505)
 + 2.Android 1.6 Donut MAA (tested on WM8505)
 + 3.Android 2.2 Froyo (WM8650)
 + 4.Android 2.3 GingerBread (WM8710)
 + 5.Android 3.0 HoneyComb
 + 6.Android 4.0 ICS (tested on A13)
 + 7.Android 4.0 ICS MIPS (tested on Ainovo)
 + 8.Android 4.0 ICS WM8850/RK3066/google_sdk
 + 9.Android 4.0 ICS v2
 + 10.Android 4.0 ICS HTC
 + 11.Android 4.0.X ICS X86
 + 12.Backup current root bin and su app     
    * Backups the system\(x/s)bin\su bins and superuser.apk to \backups\system (x/s)bin and \app
 + 13.Restore root backup                   
    * Writes the \backups su bins and superuser.apk back to the device.
 + 14.Unroots device                         
    * Removes su bins and superuser from device and sets default back.
 + 15.Check device root
    * Installs and starts the latest free version of Joey Krim's Root Checker
 + 16.HcH's Brute-Root v1 (recommended) 2.x-4.x
    * Tries to enforce a write-able FS so SU can be copied to it, works on most chinese tablets.
 + 17.HcH's Brute-Root v2 (only when v1 fails)
     -Roots almost every device (HTC/LG/SAMSUNG/A20)
     -Reboots your device twice for this procedure
     -Safe root, it should not be risky to use this tool
     -No busybox installation
     -Superuser bin and app v3.1.3
 + 18.WM8880 Root
      HcH's trick to get SuperSU properly working on a WM8880:
      Instructions:
      1. Enable ADB in settings \ developer options \ USB debugging
      2. Enable SU in settings \ Superuser setting \ Always allow
      3. Connect device to your PC and install the driver from Uberizer\usb_drivers
      4. Follow the procedure
      5. Run SuperSU once manually, upgrade the bin, and it should be fine!
      6. Test it using TechKnow ToolKit
 + 19.Root Upgrade submenu
     1. Root backup
        Backups the current superuser and su bins on your device to changer_files\system
     2. Root restore (only required if failed)
        Restores backed up root files done with option 1. It does not write back symlinks however so you may need to manually link the bins together on the FS.
     3. Enable ADB Root Mode
        Tries to get full access to a device using adb root
     4. Enable ADB Remount Mode
        Tries to get full access to a device using adb remount
     5. Remount RootFS
        Tries to get full access to a device using remount command
     5a.Remount RootFS busybox mode
        Tries to get full access to a device using remount command
     6. Remount System
        Tries to get full access to a device using remount system command
     6a.Remount System busybox mode
        Tries to get full access to a device using remount system command
     7. SuperSU-v1.65
        SuperSU of Chainfire v1.65 including NoNag and SuperSU bins
     8. Superuser-3.1.3-arm
        SuperSU of Androidsu v3.1.3
     9. Superuser-3.1.3-x86
        SuperSU of Androidsu v3.1.3
    10. Superuser-3.2-RC3-arm
        SuperSU of Androidsu v3.1.3
    11. Superuser-3.2-RC3-x86
        SuperSU of Androidsu v3.1.3
     r. RESET ADB
        When you get "error: device not found" hit "r" to RESET ADB then try another way to get more access to your device.
     h. ROOT HELP
        Short Help Me for Using the Uberizer to root devices.

        The recommended first try you attempt to get root is Brute-Root v1, it's safe
        and should not harm your device. However you may run into error such as:
        "adbd cannot run as root in production builds" when it tries to to get access.

        If you already have root and just wish to update your superuser app
        and superuser bin you can use the Root Upgrade submenu. These procedures try
        to just write certain nice root apps and bins combinations.

        Making a backup is always most wise Always do so BEFORE you start modding.
        Option 1. dumps all the bins and apps it can find on your device to your pc,
        if no error occurs on the screen. Option 2. restores whatever you have backed
        up using option 1. It does not write back symlinks however so you may need
        to manually link the bins together on the FS.

        If you try to upgrade root and it fails, you can try options 3. to 6a. to get
        access to the devices FS. After you have input one of these options just retry
        the last procedure that has failed and it very well could succeed after one of
        of these commands. When you get "error: device not found" hit "r" to RESET ADB
        then try another way to get more access to your device.

 d. Backup Menu                           
 + 0.Full device "unmod" backup to backups\%MODEL%_%DATE%_%TIME%
   * Creates a set of files that the uberizer tries to mod on your android device.
 + 1.Backup build.prop to backups\           
   * Dumps a copy of your build.prop to \backups, the prop dump name includes your model
     name, the current date and time of dump. To easily restore these backups, run 5.
 + 2.Restore build.prop                     
   * Indexes all backupped build.prop files on the system and allows the user to chose
     which file (s)he wants to restore on the tablet.
 + 3.Backup bootanimation.zip to backups\   
   * Dumps a copy of your bootanimation to backups\bootanimation.zip
 + 4.Restore bootanimation.zip               
   * Displays a selection menu of bootanimation.zips from \backups and pushes the animation to your android device.
 + 5.Backup data\ to backups\data.tgz       
   * REQ ROOT. This will backup your full /data partition, very nice to backup all your
     downloaded apps with their settings if you are planning to reflash your device.
 + 6.Backup data\app to backups\data_app.tgz
   * REQ ROOT. This will backup only data\data\apps, your "downloaded" apps. Very useful
     for sharing apps with your friends or when you are planning to reflash your device.
 + 7.Backup data\data 2 backups\data_data.tgz
   * REQ ROOT. This will backup only all the app settings on your device.
 + 8.Restore 5. data.tgz backup             
   * Easily restore backups done with option 5.
 + 9.Restore 6. data_app.tgz backup         
   * Easily restore backups done with option 6.
 + 10.Restore 7. data_data.tgz backup         
   * Easily restore backups done with option 7.
 + 11.Backup current root bins and su app     
    * Backups the system\(x/s)bin\su bins and superuser.apk to \backups\system (x/s)bin and \app.
 + 12.Restore backed up root bins and su app 
    * Writes the \backups su bins and superuser.apk back to the device.
 + 13.Backup hosts file                       
    * Backups your current hosts file of your device to backups\hosts_%date%_%time%.
 + 14.Restore hosts file                     
    * Easily restore a previously backupped hosts file.
 + 15.Backup init files to backups\init.tgz   
    * This will take all init rc files from your device and stores them into \backups seperately,
      but also this will make a tgz of the original files. This tgz is easy to recover using
      option 16, because it's a tgz the original attributes remain. You can mod the seperately
      dumped init files and adb shell chmod 750 them when you push them back.
 + 16.Restore init files backups\init.tgz     
    * Brings up a selection menu to easily select your previously created init backup.

 e. Bootanimation Menu                     
 + 1.Backup current bootanimation.zip
   * Dumps a copy of your bootanimation to backups\bootanimation.zip.
 + 2.Copy new bootanimation.zip
   * Write back backups\bootanimation.zip to your android device.
 + 3.Delete bootanimation.zip on device
   * This removes the bootanimation.zip from your device, this might slightly improve your
     boot time.
 + 4.Recover backed up bootanimation.zip
   * Brings up a selection menu with current backed up bootanimation.zip files in \backups.

 f. Multi Mod Tool Menu                   
 + 1.undex (baksmali)
   * Undex amm_files\undex_input_files\classes.dex to undex_output_files.
 + 2.dex (smali)
   * Rebuilts dex from \dex_input_files and writes to dex_output_files.
 + 2a.dex (smali) dex default undex output dir
   * Rebuilts dex from \undex_output_files\out and writes to \dex_output_files.
 + 3.Jar maker
   * Creates one .jar file from \jarmaker_input_files dir, a generated .jar file will appear in jarmaker_output_files.
 + 3a.Jar maker using existing meta-inf\manifest.mf
   * Creates one .jar file from \jarmaker_input_files dir, a generated .jar file will appear in jarmaker_output_files with manifest.mf.
 + 4.APK sign (batch-mode)
   * HcH's Microsigner, a simple way to sign a load of apks from \amm_files\apksign_input_files\ to \amm_files\apksign_output_files\.
 + 5.Update.zip maker
   * Creates simple update.zip file. Input dir \updatezip_input_files, Output zip file will be written in \updatezip_input_files
 + 6.Jarsigner
   * A tool to sign jar files, certs/keys included! Input file: \amm_files\jarsigner_input_files\unsigned.jar
 + 7.OptiPNG
   * Optimize those PNG files for maximum loading speeds! Dump all your pngs in optipng_files and run this option.
 + 8.framework-res.apk OptiPNG (alpha)
   * A attempt to automatically optimize a framework-res.apk. This rebuilts the framework and signs it.
 + 9.batch extract and decrypt manifest from apks in \aapt_input_files
 + 10.batch generate APK application details from apks in \aapt_input_files
 + 11.batch generate APK extreme details from apks in \aapt_input_files
 + 12.Update.zip signer, signs amm_files\updatezip_input_files\ zip files, warning, do not use spaces in the filenames.
 + 13.ZIP align (batch-mode), aligns all zips in amm_files\zipalign_input_files\

 g. Application Manager Menu               
 + 1.Batch install apps (from \install_apk)
   * This installs all the apk files you have stored in \install_apk on your device.
 + 2.Install1app (select from \install_apk)
   * This brings up a selection menu of all the apk files you have stored in \install_apk on your device. You can select one you want to install.
 + 3.Backup system apps to backups\sysappstgz
   * Backups the system apps of your device to backups \system_apps.tgz
 + 4.Backup data apps to backups\data_appstgz
   * Backups the data apps of your device to backups \data_apps.tgz
 + 5.Restore 4. data apps package to device
   * This easily restores a previously created backup with option 4
 + 6.Backup 1 app to backup\ .apk
   * Creates a list of all your downloaded apps, enter the generated number of the app
     you wish to backup, and the app will be downloaded to \backups.
 + 7.System App Remover (with auto backup)
   * Makes a list of all the system apps with numbers, input the prefixed number and
     the system app will be automatically backed up to /backups/%APKNAME%_%DATE%_%TIME%
 + 8.System App Restore
   * With this option you can restore previously removed system apps.

 h. Help me
   Connecting Wireless/Driverless (ROOT REQUIRED!):
   1.Go to the Wireless Menu (w)
   2.Enable Wireless ADB using ONE of these options: 2, 4 or 5, whichever is most easy for your situation.
   3.If you use an app (4 or 5), start the app on your Android device.
     Use option 6 to connect to the given IP in the app.
     If you chose option 2, you must find your device IP, go to Settings, About device, Status, to see the IP.

   Connecting Wired/Driver:
   1.Install ADB drivers (from dir usb_driver) for wired ADB
   2.Boot Android, connect device (on the device, the statusbar will display "usb debugging mode is activated")
   3.Run this tool, analyse device so this tool can seek info of your device
     and will check if your model is supported by mods
                           
 i. AllWinner Firmware Menu                     
 + 1.IMG unpacker
   * unpacks rom_kitchen\original.img, the main files are stored in _input.
 + 2.IMG packer (rom_kitchen\_input)
   * rebuilts your modded files that are previously extracted to a IMG file (output.img)
 + 3.Dump A1X firmware to Uberizer dir
   * this will dump your A10 or A13 firmware in a sub directory of Uberizer.
 + 4.Restore A1X firmware from \rom_dumps
     Restore a previously created rom dump with option 3. Special Thanks to Satcomranger for risking his tablet's life and coding fixes for the procedure.
 + 5.Start LiveSuit Pack v1.11
     Start LiveSuit for manual flashing or formatting your A10/A13 device
 + 6.Alternative IMG unpacker (by RedScorpio)
     Brings up a IMG selection MENU that lists all IMG files in uberizer\rom_kitchen\_input for extraction.
     The unpacked ROM will be stored in \rom_kitchen\_input\%ROMNAME%.DUMP\*, edit / modify the data, leave it in this directory!
     Then run option 7 to repack it!
 + 7.Alternateive IMG repacker (by RedScorpio)
     Brings up a selection MENU for .DUMP directories, select a number to rebuild the IMG from this directory.
     If the original IMG file still exists while you're making the new ROM it will be renamed to .bak. A IMG file with the same
     name as the directory will be output in: \rom_kitchen\_input\
 + 8.Dump script.bin (to uberizer root dir)
     This command remounts the boot fs so it can pull the script bin from your device. The script bin contains valuable information about touchscreen and other hardware specs. This procedure is recommended before flashing A10 or A13 devices.
 + 9.Convert script.bin to script.fex
     Converts the dumped script.bin into a fex file so you can edit it.
 + 10.Edit script.fex
     Brings up WinVi32 and let's you modify the converted bin fex file.
 + 11.Script.fex to bin converter
     Before you can use the modified bin you need to convert it back into a bin file with this command.
 + 12.Push converted script.bin to device
     Writes back the modified script.bin to your device, reboot and the effects should be active.

 j. Google Play Store Menu
 + 1.Install Normal Mode
    Deploys Google Play Store version 4.4.2.2 to device without any form of remount/root request.
 + 2.Install Remount Mode
    Deploys Google Play Store version 4.4.2.2 to device with adb remount for write access. Use this option when a normal install fails.
 + 3.Install Root Mode
    Deploys Google Play Store version 4.4.2.2 to device with adb root for write access. Some distros require you to write the new Play Store this way. Use this option when a normal install fails.
 + 4.Fake Nexus10 build for full access
    Makes a backup of your current build.prop file to %UBERIZERDIR%\backups\ and modifies the build.prop on the device to emulate a Nexus 10 in order to get full play store access unlocked. This procedure also automatically clears out the Google Services Framework Data and Google Play Store cache.
 + 5.Clear Market Cache
    This procedure also automatically clears out the Google Services Framework Data and Google Play Store cache.

 k. Various Mods Menu                     
 + 1. Sync device FS
   * syncs android device's FS, for safe shutdown for example.
 + 2. Clean Dalvic Cache
   * cleans the dalvic cache
 + 3. Add Tar 1.23 bin (auto backups old)
   * this adds the real deal TAR binary to your android device!
 + 4. Install anti ad and malware hosts file
   * adds the MVPS hosts file to protect you against the most known malware servers.
 + 5. Add GREP/EGREP/FGREP 2.6 bins
   * adds the GREP binaries to your android device, enjoy full grep functionality!
 + 6. Add PHP v5.3.2 and Groomdroid webserver
   * copies needed files and installs a PHP pre-configured Groomdroid web server.
 + 7. ICS Screen Capture to /screenshots
   * takes a screenshot of your screen and stores it in /screenshots
 + 8. Add Capture ICS bin to device
   * adds the ICS capture bin to your device, EXPERIMENTAL FEATURE . UNTESTED
 + 9. Add bash 4.1 bin to device
   * for those Shell Ninjas out there, here it is ... BASH 4.1 on android!
 + 10. Config Groomdroid on device
   * easily edit your config.
 + 11. Market and Framework Cache clean
   * performs the "market flush" for you.
 + 12. Clean dalvik-cache
     Deletes everything in the dalvik-cache, reboot is required after this procedure, so
     the system can rebuilt the cache on boot.
 + 13. HcH's Android Lock Crusher
   * HcH's Lock Crusher will remove passwords, lockscreen and locks from Android devices,
     it will attempt to get the best access to a connected device and tries to remove them
     all, but not before making backups of the files that are deleted in this procedure to
     \backups.
 + 14. Remove Phone (with auto backup)
   * This option will remove phone.apk and TelephonyProvider.apk from /system, without
     any extra switches this will backup the removed items.
 + 15. Realtime LOGCAT Monitor 1024x768
   * Starts a new command prompt window fit for 1024x768 resolution.
 + 16. Dump LOGCAT to TXT file
   * Dumps the LOGCAT output as a TXT file in the Uberizer dir. After the dump has
     completed, WinVi editor will open the generated TXT file.
     Output file example: LOGCAT_npm702_NOVO7PALADIN_20122511_0202.txt
 + 17. Generate full device and bug report
   * Dumps dumpsys, dumpstate, and logcat to a TXT file in the Uberizer dir. After
     the dump has completed, WinVi editor will open the generated TXT file.
     Output file example: BUGREPORT_npm702_NOVO7PALADIN_20122511_0205.txt
     NOTE: This dump can take quite a while. If your device has vibration it will go
     off once at the start of the dump and will go off twice when it's completed.
     This dump can take up to one minute to complete.
 + 18. Dump DMESG (Diagnostic messages) to TXT
   * Dumps out of DMESG in the Uberizer dir and opens the output file in WinVi,
     Output file example: DMESG_npm702_NOVO7PALADIN_20122511_0234.txt
 + 19. Fix /data/local permissions
   * Needed on some ICS roms when ADB installation fails.
 + 20. Backup and remove batterystats.bin
   * Handy for re-calibrating your battery. Batterystats is file that actually follow
     the usage of power by android apps. However, some problems conserning calibration
     and indication can relate to this file.
 + 21. Backup and remove Unlock Pattern
     Simply removes the settings.db so you can use your device again.
 + 22. Enter device's ADB shell
     For all the shell ninja's out there
 + 23. Enter device's ADB shell (remountmode)
     This remounts data system and root to be read write, consider this option as
     browsing under root privileges, be careful what you mod! After you have closed
     this shell session, the remounts remain active in the adb session. In other words
     if you have problems modding your build prop for example, run this option, close it
     and retry, good chance you can now edit system files.
 + 24. Edit init.rc and push back
     For pro's only, allows you to modify your init.rc and copy the modified init.rc back
     to your device. Handy for developers who are debugging.
 + 25. Edit init.%MODEL%.rc and push back
     For pro's only, allows you to modify your init.rc and copy the modified init.rc back
     to your device. Handy for developers who are debugging and people who have problems
     with touch screen or gsensor on sun5i / a13 models to swap drivers.
 + 26. Execute SH script from \files_to_sd
     Easily load up a SH file to /system, set execute permissions and execute it interactively!
     Testing your scripts was never this fast before!

 l. Files to SD (extsd)       
 + This will write files from \files_to_sd to your device /mnt/extsd or /sdcard

 m. Donate to TechKnow                     
 + How very kind of you to consider!

 u. Update Uberizer                       
 + Connects to TechKnow and downloads the latest version, and installs it over itself.

 q. Quit                                   
 + A very common command that should not require explanation. However, quitting the
   Uberizer cleans up it's temporary files and shut downs the adb server properly.

 r. Reboot device                         
 + While your device is connected you can reboot it to see if certain mods are accepted
   or other testing purposes. Uberizer will play pong with itself until your ADB is back online.

 s. System analyzer
 + Analyzes connect Android devices and give a true load of information about anything like processor, ram, memory, storage, modules. Dumps a text file in the Uberizer root directory with all your device's system specs.

 t. Install TechKnow ToolKit to device
 + TechKnow ToolKit Features v2.0:
   * WM8505 Analyzer
   * A10 / A13 Dump Firmware to SD
   * A10 / A13 Pull and Push script.bin
   * Shutdown
   * Reboot
   * Reboot into Recovery
   * Hidden feature
   * Wireless Uberizer / ADB control panel
   * LogCat viewer (plus write log to SD function)
   * Error LogCat viewer (plus write log to SD function)
   * Root Check
   * BusyBox Check
   * Analyser
   * WM Analyser
   * Remount FS RW
   * IP Config

   TechKnow ToolKit Function overview:
 + Wireless Uberizer / ADB control panel
   Enjoy the wonders of wifi running driverless ADB to your computer. This way, you can also use the Uberizer Wireless to manage your device! (root is required for this function)
 + WM8505 Analyzer
   Before you flash your WM8505 be sure to run this tool! It will save essential recovery information in the case you flash the wrong ROM! With some extra command and the created text file by this function you can easily fix your non function touch screen, no sound and crashes on the camera for example!
 + A10 / A13 Dump Firmware to SD
   Before you flash any A1X device, it is most wise to make a backup of your current firmware. The bootloader, recovery, system, etc will be written to your SD card, make sure you have one present at the time of dumping!
 + Shutdown, Reboot and Reboot into Recovery
   On the MK802 and the MK808 we don't have a nice shutdown function. This results in losing data after a reboot due the FS didn't synchronize when you powered off. Apps can get lost and data will be lost when you disconnect the power. These functions safely sync the FS and try to shutdown your device. Root access is required.
 + A10 / A13 Pull and Push script.bin
   The script.bin file of the A1X models contains essential information of your device's configuration. With this function, you can very easily recover from a bad flash in most cases. Make sure you run this command before you write the new firmware!
 + LogCat viewer (plus write log to SD function)
   Easily view your logcat for debugging problems. This option also offers you to dump the logcat output to your SD for further investigation on your desktop or to post the logcat output on TechKnow so the TechKnow Technicians can investigate your problem with all the required details.
 + Hidden Feature
   I'm sure you'll quit looking for it.
 + Root Check
   Simply asks superuser permissions, real handy to have when you're developing a ROM or when you are trying to root your device using the Uberizer to test superuser permissions. This also outputs the error on the su command.
 + BusyBox Check
   We can not live without BusyBox, it will expand your device functionality greatly and it's required for some apps, such as the TechKnow ToolKit. This command simply checks if a busybox bin is present, then it displays what version is available. However, do note that this output does not mean busybox is properly installed. Some devices require you to execute "busybox --install" to get in the system, be warned however, there are reports of members losing root access by installing busybox. Busybox carries it's own su binaries which could overwrite the ones your firmware require!
 + Analyzer
   Generating a device report was never this easy! This option also offers the user to write the report to SD, so the user can post the analyser output for specifications when requesting help/firmware etc. Details include: cpu info, partition info, build.prop and much more! NEW in v2.0: Extended partition/FS/module info.
 + WM Analyzer
   A must have for anyone thinking of installing a Universal WonderMedia Uberoid version. This functions allows you to save the essential parameters of your device and for 8850's it will tell which FWC (model) you will need to flash! Always write the output of the WM Analyser to your SD BEFORE installing Uberoid will ensure you won't have problems that can not be fixed after flashing.
 + Remount FS RW
   Devices such as the 8850 have the system set to RO, this is due security measures which are fine. However, sometimes you will need to remount the FS RW so you can edit some files. This function tries to remount your system, it works on my devices but it's possible this function will not work on all devices.
 + IP Config
   Shows your IP easily without having to go to all those menus.

 v. MediaManager

   Uberizer Media Manager Help

   This tool is intended for easy media/file synchronisation. You can easily add a Android Media Box or Player wireless using option 1. and the TechKnow ToolKit or any other tool to enable wireless ADB on your rooted device.

   Quick start:
   1. Add your media player wireless, if you have connected a android device on your computer you do not need to do this.
   2. Copy the files you want to UBERIZER\files_to_sd, did you know that you can easily browse the Uberizer just by pressing "o" in the main menu? Or you can select "Open Uberizer Directory" from the start menu entry of the Uberizer.
   3. You most probably want to use EZ Syncmode, this instantly uploads and plays the uploaded media on the android device. Option 4. is intended for devices that share the same media data present.

 - If you happen to use multiple Android devices and would like to sync your favorite music or clips or movies to them all, this makes it very easy to do that! This tool even includes a remote control for stopping playback. Ideal for situations where you would like to have images, music or movies played back at multiple devices such as cafe's.
 + 1. Add Wireless Device
     Add a IP address and port (if you use a different adb port on your device only). Use Wireless ADB on the device to enable this connection. The TechKnow ToolKit (included in the uberizer under option "t") or any other wireless adb app would do to add it.
 + 2. List online mediaplayers
     Reset ADB and rebuild the list of available devices
 + 3. Sync \files_to_sd to all
     Just writes all files to the connected devices sd cards
 + 4. Play file on mediaplayers
     Assuming you have synced files to all the devices so they have the same content you can playback a file that has been previously written to it
 + 5. Stop file playback on all
     Presses the return button on all connected devices.
 + 6. EZ Video Syncmode
     Select a video file from \files_to_sd, sync and play it on all devices connected on your network running the TechKnow ToolKit's Wireless ADB mode or connected to your PC
 + 7. EZ Image Syncmode
     Select a JPG/PNG file from \files_to_sd, sync and play it on all devices connected on your network running the TechKnow ToolKit's Wireless ADB mode or connected to your PC
 + 8. EZ Audio Syncmode
     Select a MP3/M4a/3GP/etc. audio file from \files_to_sd, sync and play it on all devices connected on your network running the TechKnow ToolKit's Wireless ADB mode or connected to your PC
 + 9. Deploy APKs to all \files_to_sd to all devices
     Install APKs from \files_to_sd to all devices connected on your network running the TechKnow ToolKit's Wireless ADB mode or connected to your PC
 + 10.Sync date and time
     Function for synchronizing time as far as possible, it could be off a couple of milliseconds I gues... I'm postive. But not seconds ;-)
 + 11. Erase all /sdcard
     Entirely erase the SD cards on all connected devices.

 w. Wireless Menu
 + 1. Help and HowTo
   * Short intro and HowTo on connecting your device
 + 2. Enable Wireless ADB through wired ADB
   * When you are already ADB connected, you can start Wireless mode
 + 3. Disable Wireless ADB
   * Wired or wireless, disables Wireless ADB server
 + 4. Wired install of Wireless ADB APP
   * Install a ADB APP of choice to your device (2 loaded)
 + 5. Copy Wireless ADB APP to SD
   * Prepare a SD card for the Uberizer
 + 6. Connect
   * Connect your device to your computer/uberizer to use it. Your IP-address and you can specify
     if desired a custom port, default port = 5555, leave the default port empty to use 5555.

 x. Install Virtual OldPC 95 to device     
 + This will copy the oldpc95 hd image with dos6.22, win2.3, win3.11 and win95, with 17 small games.
   Run this image using the slightly modified aDosBox that will be installed with this command. To
   enhance the screen quality, go to menu, sdl settings, video settings and select smooth the video.
   A reboot is required, if your device is powerful enough you will have no delays. To start Win3.11
   or 2.1 or Dos 6.22, on booting the dosbox image hit F5 and select option 5 from the boot menu, or
   exit windows to command prompt in the shutdown menu. Run "autoexec" once you are in the prompt and
   a helpful menu with the games will appear.


Changelog:
v1.8 (189 functions):
* upgraded google market / play store to 4.4.2.2
* fixed recovery flash in the Allwinner recovery procedure
* removed driver preinstallation procedure as it has some problems with some devices
* fixed root check option
* added auto launch of the TechKnow ToolKit on installation
* added various item k/26: scriptexe, takes a .SH file from \files_to_sd and executes it!
* added changer_files\CONMOD.sh, a script to change configurations of WM8650's
* added v. MediaManager 1. Add Wireless Device
* added v. MediaManager 2. List online mediaplayers
* added v. MediaManager 3. Sync \files_to_sd to all
* added v. MediaManager 4. Play file on mediaplayers
* added v. MediaManager 5. Stop file playback on all
* added v. MediaManager 6. EZ Video Syncmode
* added v. MediaManager 7. EZ Image Syncmode
* added v. MediaManager 8. EZ Audio Syncmode
* added v. MediaManager 9. Deploy APKs to all
* added v. MediaManager 10. Sync date and time
* added v. MediaManager 11. Erase all /sdcard
* added v. MediaManager H. Help
* removed preinstall drivers directory
* rewrote the CWM WRITE procedure for AllWinner
* updated the code to show techknow's new domain: www.techknow.me instead of the old www.techknowforum.net
* added i. 13 show/dump device partition information

HcH
« Last Edit: August 07, 2017, 10:31:18 PM by HardcoreHacker »

Offline HcH

  • TechKnow Owner, Ethical Hacker
  • Administrator
  • Uber Member
  • *****
  • Posts: 9946
  • Karma: +2285/-111
Re: [latest] Uberizer v1.8 26DEC2013
« Reply #1 on: December 26, 2013, 09:10:50 PM »
Enjoy this fine release and Happy Holidays to everyone ;)

Cheers,

HcH

Offline bamz05

  • Newbie
  • *
  • Posts: 1
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: 7"
Re: [latest] Uberizer v1.8 26DEC2013
« Reply #2 on: December 27, 2013, 07:35:06 PM »
tnx always  to techknow.

Offline HcH

  • TechKnow Owner, Ethical Hacker
  • Administrator
  • Uber Member
  • *****
  • Posts: 9946
  • Karma: +2285/-111
Re: [latest] Uberizer v1.8 26DEC2013
« Reply #3 on: December 27, 2013, 10:27:50 PM »
tnx always  to techknow.
You're welome bamz05 ;)

Enjoy!

HcH

Offline lee_cross2

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
  • Uber-Noobie
Re: [latest] Uberizer v1.8 29DEC2013 Updated
« Reply #4 on: January 01, 2014, 09:08:07 PM »
when i download the file and go to run it says its corrupt?? any suggestions?

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [latest] Uberizer v1.8 29DEC2013 Updated
« Reply #5 on: January 01, 2014, 10:10:31 PM »
when i download the file and go to run it says its corrupt?? any suggestions?

Yes  redownload it !  Mine was fine !
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline lee_cross2

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
  • Uber-Noobie
Re: [latest] Uberizer v1.8 29DEC2013 Updated
« Reply #6 on: January 01, 2014, 10:13:43 PM »
downloaded several times and each time getting same response im using win 7 64 bit wonder if thats the issue?

Offline tifftiff314

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: 7" Allwinner a13
Re: [latest] Uberizer v1.8 29DEC2013 Updated
« Reply #7 on: January 09, 2014, 12:07:44 AM »
okay i have it all downloaded and connected... I can figure most stuff out but could be the fact that i have been dealing with this tablet for hours and just a tad bit irritated and not sure what option to do to just reset it or where to go to take the pattern lock code off this tablet. if anyone could help that be awesome.. i would hate to do something and ef this thing up and void my warranty lol

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [latest] Uberizer v1.8 29DEC2013 Updated
« Reply #8 on: January 09, 2014, 12:17:35 AM »


uberizer menu

k    21

Backup and remove pattern lock         
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline hybernation

  • Newbie
  • *
  • Posts: 20
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: hts-200
Re: [latest] Uberizer v1.8 29DEC2013 Updated
« Reply #9 on: January 10, 2014, 06:10:00 PM »
Simply awesome :android-wink: :android-wink:

Offline HcH

  • TechKnow Owner, Ethical Hacker
  • Administrator
  • Uber Member
  • *****
  • Posts: 9946
  • Karma: +2285/-111
Re: [latest] Uberizer v1.8 29DEC2013 Updated
« Reply #10 on: January 11, 2014, 01:05:17 PM »
Simply awesome :android-wink: :android-wink:
Hey hybernation,

I'm always happy to read someone likes it! Enjoy!!!

HcH

Offline Glitch_Neo

  • Hack it, Break it, Fix it...
  • Uber Member
  • *****
  • Posts: 678
  • Karma: +225/-0
  • ☻☻ Please Support Techknow.me ☻☻
  • Tablet / Size / Model: B1-760HD, B1-730HD, A70x (*Still lol*) Nexus 7, Various TV Boxes.
Re: [latest] Uberizer v1.8 29DEC2013 Updated
« Reply #11 on: January 13, 2014, 05:20:30 AM »
Uber Love to HcH & the staff who beta tested:android-nerd: :android-rules:

Great tool man

Offline hybernation

  • Newbie
  • *
  • Posts: 20
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: hts-200
Re: [latest] Uberizer v1.8 29DEC2013 Updated
« Reply #12 on: January 13, 2014, 06:42:40 PM »
Simply awesome :android-wink: :android-wink:
Hey hybernation,

I'm always happy to read someone likes it! Enjoy!!!

HcH


Sure. Thanks for this great tool.

Offline haytham

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: 7inch & 9inch
Re: [latest] Uberizer v1.8 29DEC2013 Updated
« Reply #13 on: January 14, 2014, 09:48:48 PM »
hello i have Enet tablet 704h
ive download the firmware from its website but the problem is after the firmware installed by livesuit 1.09 the camera doesnt open its give me "unfortunately the camera stopped" , and the touch screen is not working well

i have another tablet working well the same model
can i back up its firmware by uberizer and make it as "img" file and upload it in the other defective tablet by livesuit 

thanks

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [latest] Uberizer v1.8 29DEC2013 Updated
« Reply #14 on: January 14, 2014, 10:55:49 PM »
hello i have Enet tablet 704h
ive download the firmware from its website but the problem is after the firmware installed by livesuit 1.09 the camera doesnt open its give me "unfortunately the camera stopped" , and the touch screen is not working well

i have another tablet working well the same model
can i back up its firmware by uberizer and make it as "img" file and upload it in the other defective tablet by livesuit 

thanks

no the uberizer will not make a flashable image file
you would have to do a rom dump on the good tab   and restore on the broke one .. would only work if they were identical in all respects ..
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline ricalgen

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: I.Robot®II 7" mid-1689
Re: [latest] Uberizer v1.8 29DEC2013 Updated
« Reply #15 on: January 16, 2014, 03:39:39 PM »
I still cannot restore my i robot II mid-1689 (A13) tablet with board id = TZX-713B v1.51 . I have i robot II mid-1689 tablet which is damaged caused by wrong CWM installed. I flash this firmware http://www.4shared.com/file/4Zzga-eK/KP_ADVANC_AT_CUTTER_v422_TZX-7.htm to my tablet using LiveSuitePack v1.11 and bring my tablet back to life after upgrade success. Everything works fine, the Touch Screen, the G-Sensor, the wifi, the 3g function, and the Camera Front and Back except the LED that can be used to make the back Camera Flash and also used by the Flash Light Apps. I missed my i robot II mid-1689 because it has 1Gb rom and 5Gb sdcard. After i Flashed it to kpadvanc cutter firmware, it only have a 512Mb rom for internal storage and 4Gb for sdcard. I have a friend who have exactly the same tablet and unit to mine which is i robot II mid-1689. I borrow the tablet and back up the firmware using Uberizer v1.8 by going to I>3.. I follow all the steps, everything goes fine until the process is done. I connect my own tablet to the PC, installed all the necessary drivers for proper ADB connection and start restoring the firmware everything goes fine from STEP1 to STEP7 the problem is on the STEP 8 because my tablet didn't work on CWM it cannot format anything, either mounting any thing there.. So please Uberizer creator, help me about my Tablet. thanks!

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [latest] Uberizer v1.8 29DEC2013 Updated
« Reply #16 on: January 16, 2014, 05:27:19 PM »
I still cannot restore my i robot II mid-1689 (A13) tablet with board id = TZX-713B v1.51 . I have i robot II mid-1689 tablet which is damaged caused by wrong CWM installed. I flash this firmware http://www.4shared.com/file/4Zzga-eK/KP_ADVANC_AT_CUTTER_v422_TZX-7.htm to my tablet using LiveSuitePack v1.11 and bring my tablet back to life after upgrade success. Everything works fine, the Touch Screen, the G-Sensor, the wifi, the 3g function, and the Camera Front and Back except the LED that can be used to make the back Camera Flash and also used by the Flash Light Apps. I missed my i robot II mid-1689 because it has 1Gb rom and 5Gb sdcard. After i Flashed it to kpadvanc cutter firmware, it only have a 512Mb rom for internal storage and 4Gb for sdcard. I have a friend who have exactly the same tablet and unit to mine which is i robot II mid-1689. I borrow the tablet and back up the firmware using Uberizer v1.8 by going to I>3.. I follow all the steps, everything goes fine until the process is done. I connect my own tablet to the PC, installed all the necessary drivers for proper ADB connection and start restoring the firmware everything goes fine from STEP1 to STEP7 the problem is on the STEP 8 because my tablet didn't work on CWM it cannot format anything, either mounting any thing there.. So please Uberizer creator, help me about my Tablet. thanks!

here is the problem .. you flashed a wrong cwm and then probably flashed a WRONG rom .. now the uberizer cannot choose what partitioning schema you even need ..

use version 1.6 and choose your own CWM learn how to do that from here
Complete Guide for A13 Devices
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline oranger

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
  • Uber-Noobie
Re: [latest] Uberizer v1.8 29DEC2013 Updated
« Reply #17 on: February 06, 2014, 02:39:22 PM »
I just want to say thank you soooooooooo much for this wonderful app! What happened is that I accidentally bricked my x5 tablet! I installed this awesome app and it helped me just by choosing the list under " b. Build Menu". Oh God! You're a genius! Thanks again!

More power!

Offline Csaló Félix

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: WonderMedia 8850-mid
Re: [latest] Uberizer v1.8 29DEC2013 Updated
« Reply #18 on: February 18, 2014, 03:32:24 PM »
 :android-inlove:
Köszönöm!
Csaló Félix
 :-D

Offline roxu31

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
  • Uber-Noobie
Re: [latest] Uberizer v1.8 29DEC2013 Updated
« Reply #19 on: February 22, 2014, 01:35:03 PM »
My antivirus has blocked uberizer to be a Trojan, it is possible???, I can hardly believe it.

  Link to the virustotal analysis.

https://malwr.com/analysis/NmY5MDYyOTg4MzlkNGYwNWFmZTQ5YTE5MjQwODM3NTI/
« Last Edit: February 22, 2014, 10:05:18 PM by roxu31 »

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [latest] Uberizer v1.8 29DEC2013 Updated
« Reply #20 on: February 22, 2014, 06:29:44 PM »
My antivirus has blocked uberizer to be a Trojan, it is possible???, I can hardly believe it.
  Link to the virustotal analysis.

https://malwr.com/analysis/NmY5MDYyOTg4MzlkNGYwNWFmZTQ5YTE5MjQwODM3NTI/

no there is no virus .. and get rid of the scroll .. totally unecessary ..
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline roxu31

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
  • Uber-Noobie
Re: [latest] Uberizer v1.8 29DEC2013 Updated
« Reply #21 on: February 22, 2014, 10:09:03 PM »

Quote
no there is no virus .. and get rid of the scroll .. totally unecessary ..


Hello again, I first want to apologize for the text scroll, I had seen at the time of publishing the post, but I believed it to the interface of the forum, and not being familiarized with it, I have not given importance. Sorry.

Offline roxu31

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
  • Uber-Noobie
Re: [latest] Uberizer v1.8 29DEC2013 Updated
« Reply #22 on: February 24, 2014, 12:24:23 PM »
Hi I have a problem with a allwinner a13 7" tablet. It doesn't want boot up and when I try to go to recovery it just stays at the android with the red exclamation mark. No other button pressing helps. It just stays there for a while and then restarts. I tried connecting it to the computer but it doesn't want to pick up anything. I don't know what to do next. Any help would be greatly appreciated.



Hi, normal when you boot the tablet  in recovery mode and displays the screen with the android and exclamation, you have to press the vol up or vol down key to confirm, when this isnt work, is possible the recovery may be wrong or the key assignment is incorrect, if you have copy of the firmware you can flash using phoenixsuite, otherwise you need search a img file  with a similar specs of your tablet,  if your screen resolution is 800x480 tablet, it is especially important not to use a rom for 1200x600 or up , the systemui.apk for 1200x600 or up, dont  work properly with the tablets use screen of 800x480, the parameters to modify a touch, wifi etc its very easy to modify, you can edit the script.bin file and change the proper parameters to work in your tablet.   


Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [latest] Uberizer v1.8 29DEC2013 Updated
« Reply #23 on: February 24, 2014, 05:08:34 PM »
Hi I have a problem with a allwinner a13 7" tablet. It doesn't want boot up and when I try to go to recovery it just stays at the android with the red exclamation mark. No other button pressing helps. It just stays there for a while and then restarts. I tried connecting it to the computer but it doesn't want to pick up anything. I don't know what to do next. Any help would be greatly appreciated.

what does this have to do with the uberizer ?
Post deleted ..
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline stylenote6

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
  • Uber-Noobie
Re: [latest] Uberizer v1.8 29DEC2013 Updated
« Reply #24 on: February 24, 2014, 06:04:16 PM »
Hi I have a problem with a allwinner a13 7" tablet. It doesn't want boot up and when I try to go to recovery it just stays at the android with the red exclamation mark. No other button pressing helps. It just stays there for a while and then restarts. I tried connecting it to the computer but it doesn't want to pick up anything. I don't know what to do next. Any help would be greatly appreciated.

what does this have to do with the uberizer ?
Post deleted ..

I know it may not be relevant. But I don't see anyway to contact anyone of u directly and I basically wanted to speak to HcH on how to get uberizer to work with this tablet. But if u think it irrelevant and not related I will create a whole new post for one stupid question. Thanks for the people with manners who gave me some assistance. I appreciate your kindness and willingness to speak to me before feeding your ego like some people.

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [latest] Uberizer v1.8 29DEC2013 Updated
« Reply #25 on: February 24, 2014, 06:27:07 PM »
Hi I have a problem with a allwinner a13 7" tablet. It doesn't want boot up and when I try to go to recovery it just stays at the android with the red exclamation mark. No other button pressing helps. It just stays there for a while and then restarts. I tried connecting it to the computer but it doesn't want to pick up anything. I don't know what to do next. Any help would be greatly appreciated.

what does this have to do with the uberizer ?
Post deleted ..

I know it may not be relevant. But I don't see anyway to contact anyone of u directly and I basically wanted to speak to HcH on how to get uberizer to work with this tablet. But if u think it irrelevant and not related I will create a whole new post for one stupid question. Thanks for the people with manners who gave me some assistance. I appreciate your kindness and willingness to speak to me before feeding your ego like some people.

you dont contact us directly .. you make a topic or a post about your tablet .. There was no question about how to get the uberizer to work with this tablet in your previous post ..if there was then it would not have been deleted ..
if your tablet doesnt boot and in recovery all you get is a dead droid that means  there is no REAL recovery mode for this tablet which is very typical of these tablets ..and if your computer will not communicate with the tab  then double check the driver install 
read  please read this     and  Complete Guide for A13 Devices
i suggest you get the stock rom from your seller and reflash the tablet ..
« Last Edit: February 24, 2014, 06:35:49 PM by satcomranger »
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline insomniacno1

  • Newbie
  • *
  • Posts: 23
  • Karma: +4/-0
  • Uber-Noobie
  • Tablet / Size / Model: Minami A20/ 7 inch/ Model M-750
Re: [latest] Uberizer v1.8 29DEC2013 Updated
« Reply #26 on: February 27, 2014, 12:47:17 PM »
Hi and thank you so much for this nice tool, but may i suggest to use a second mirror since I'm now on my 3rd download trial from mediafire - it keeps stopping around 61% and resume is not supported.

Thanx again

JBJ

EDIT: Afyter 8 tries I finally got the file downloaded, but Please, could someone upload it to a server that supports resume or don't cut off the transfer:) So other than I can get the file:)
« Last Edit: February 28, 2014, 02:26:49 AM by insomniacno1 »

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [latest] Uberizer v1.8 29DEC2013 Updated
« Reply #27 on: February 27, 2014, 05:47:19 PM »
Hi and thank you so much for this nice tool, but may i suggest to use a second mirror since I'm now on my 3rd download trial from mediafire - it keeps stopping around 61% and resume is not supported.

Thanx again

JBJ

there is nothing wrong with the link and what do you mean on your 3rd trial ?  I have never signed up to mediafire just to get to use it ????
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline pme

  • Newbie
  • *
  • Posts: 1
  • Karma: +1/-0
  • Uber-Noobie
Re: [latest] Uberizer v1.8 29DEC2013 Updated
« Reply #28 on: April 19, 2014, 04:02:17 PM »
Awesome thanks

Offline nokiasoft

  • Newbie
  • *
  • Posts: 1
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: G700
Re: [latest] Uberizer v1.8 29DEC2013 Updated
« Reply #29 on: April 20, 2014, 08:08:45 PM »
Love This forum :)