TechKnow

Author Topic: HowTo Fix or Enable Dualcam / Dual cam camera on WM8850  (Read 3343 times)

0 Members and 1 Guest are viewing this topic.

Offline HcH

  • TechKnow Owner, Ethical Hacker
  • Administrator
  • Uber Member
  • *****
  • Posts: 9947
  • Karma: +2285/-111
HowTo Fix or Enable Dualcam / Dual cam camera on WM8850
« on: December 04, 2013, 06:55:57 PM »
HowTo Fix or Enable Dualcam / Dual cam camera on WM8850

1. open up a terminal session (jackpals terminal emulator / connectbot),

2. enter "su"<enter>

3. enter "setenv wmt.camera.param 1:12:0:0:0:1:13:0:0:2420"<enter>
    OR "setenv wmt.camera.param 1:12:0:0:0:1:13:0:3:2420"<enter>

4. reboot

5. check camera

Offline FELEX

  • Newbie
  • *
  • Posts: 2
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: NEWSMY/7/WM8850
Re: HowTo Fix or Enable Dualcam / Dual cam camera on WM8850
« Reply #1 on: January 09, 2014, 03:57:50 PM »
Hi, i'm trying to do this, but the terminal show me this:

sh: setenv: not found

I have this ROM WM8850_Universal_Uberoid_v3.0_JB_4.1.1_19SEP2013-HcH

Why i can fix the cam?

Thank you.
« Last Edit: January 11, 2014, 06:02:33 PM by FELEX »

Offline FELEX

  • Newbie
  • *
  • Posts: 2
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: NEWSMY/7/WM8850
Re: HowTo Fix or Enable Dualcam / Dual cam camera on WM8850
« Reply #2 on: January 11, 2014, 06:01:53 PM »
Hi, finally I've fixed the cam with this command:

"wmtenv set wmt.camera.param 1:12:0:0:0:1:13:0:3:2420" :android-rules:, but the back camera is vertical flip, how I can fix this? :android-sad:

thank you

Offline atlas35

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: WONDERMEDIA /7/8850
Re: HowTo Fix or Enable Dualcam / Dual cam camera on WM8850
« Reply #3 on: March 11, 2014, 01:43:01 AM »
try this confg...

wmtenv set wmt.camera.param 1:12:0:0:0:1:13:1:0:2420

Offline gcpalaca

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: Royqueen 7" DUAL CORE Tablet RQ788
Re: HowTo Fix or Enable Dualcam / Dual cam camera on WM8850
« Reply #4 on: August 23, 2014, 06:43:42 AM »
try this confg...

wmtenv set wmt.camera.param 1:12:0:0:0:1:13:1:0:2420

May I ask if anyone knows the significance or a detailed explanation of this values "1:12:0:0:0:1:13:1:0:2420" ?
For instance, the number "2420" represents what?

By the I have already tried this to my tablet and it works ("Unfortunately gallery stopped" error when opening the camera has been resolved) but there are some glitches like camera quality is poor, rear camera is flipped horizontally and if I switch from rear to front camera, the usual error comes out.

If only I have a guide to what values should I set to the camera parameters so that I can do trial and error until I got the correct values for my tablet.

Thank you.
« Last Edit: August 23, 2014, 06:54:41 AM by gcpalaca »