Hi. My experience
I followed the instructions in flashing the ROM. In my 1st try, I inserted my SD card to my netbook (PID7_8198_normal), then suddenly, after the default boot splash, the screen went black then i waited for some few minutes. I was afraid that my netbook is bricked. Approx. 10 minutes after, I removed my SD card. The set-up flashed in just milliseconds (i'm not sure, but maybe, below, it was showing somewhat remove sd card or finish). My decision was right. If I removed the SD card directly thinking that the process is not starting, my netbook will surely be bricked. The set-up is running while the screen shows black.. WEIRD! (what wrong with this?).I turned my netbook on and it takes about 37 seconds (I counted a couple of times) to show something, like the boot animation (Android 4.1.1). In the first load, it configured/updating apps, then shows the home screen. I thought I have done something wrong because in the first 37 seconds, it shows nothing. I FLASHED EVERYTHING AGAIN, but it shows the same thing. At this time, I chose The metro launcher from the drawer. I went through the device.. I found something wrong, the CAMERA and WIFI is not working! (Before flashing) Luckily, I have the parameters. Maybe, the +PID7_8198_normal.fwc contains invalid parameters for my device. Yes, I used the analyser from the download, but upon dumping it to the SD card or before, I was not able to find anything like the model no. I searched and I found a similar app. It contains WM Analyser. I clicked it, and the device informations was provided. I dumped it into my SD card, unmounted, open it into my computer, but UNFORTUNATELY, the .TXT file doesn't contain anything. I tried it again but the same thing happened. I printscreen it instead
. (on uberoid) I applied this parameters using a terminal emulator, i downloaded it from google play store. su <enter> wmtenv set (blah, blah, blah) both for the wifi and the camera. I restarted and it worked fine. For now, everything runs fine except the BOOT! Have I done something wrong? Do I need to flash again? (noooooooo!!) I think the .fwc file must be replaced inorder for the camera and wifi to work. I will attach the edited (ill combine them) screenshots.
sorry for the VERY BAD english :/
Benchmark result: (i disabled the forced landscape from setting. I observed that it could get higher fps in 3D, around 7-9 fps) I also run quick boost using memory booster lite, it increases the ram score)
"CPU: Poor, Can not run large apps smoothly. RAM: General, 2D graphics: Poor, 3D graphics: General, Supports most games on it"