TechKnow

Author Topic: [WM8850] Universal Uberoid v3.1 JB 4.1.1 22NOV2013  (Read 79056 times)

0 Members and 3 Guests are viewing this topic.

Offline hardlyworthit

  • Newbie
  • *
  • Posts: 2
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: WM8850 - Benton BT-M708D dual camera 4.1.1
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #30 on: December 07, 2013, 05:17:49 PM »
Just like to say how great this ROM is. Installed on a Benton BT-M708D which comes out of the analyzer as Eken_MID7_W70_GSL1680_Z7Z67-030A. I was having repeated battery flat problems (suddenly going completely flat) but now the battery consumption in unbelievably good.

Had to do the rear camera fix - easy.

Many thanks  :android-lol:

Offline martijnn2

  • Newbie
  • *
  • Posts: 5
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: tomtec 7
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #31 on: December 07, 2013, 07:49:13 PM »
Hi, can i leave wifi on on this rom/tablet?

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #32 on: December 07, 2013, 07:58:50 PM »
Hi, can i leave wifi on on this rom/tablet?

???  What ???

If you want to leave wifi on  look in the settings for wifi .. there shud be a sleep/no sleep setting .. 
if there isnt then try   wifi keep alive or similar application !  Course remember it will lower battery times if the wifi is always on !
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline Sean De Jesus

  • VIP Moderator
  • Full Member
  • *
  • Posts: 139
  • Karma: +20/-1
  • Tablet / Size / Model: WonderMedia WM8850
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #33 on: December 08, 2013, 09:01:43 AM »
Hi, can i leave wifi on on this rom/tablet?

Hi martijnn2,

No, because It doesn't have a Wi Fi Sleep Policy on its Wi Fi settings but you can try this FREE app if it works.. : https://play.google.com/store/apps/details?id=com.shantz.wifikeepalive&hl=en

set the Wi Fi behavior to "Always On" if you want to keep the Wi Fi alive even you turn the tablet's screen off, but doing this will get your battery drained/ low battery.
« Last Edit: December 08, 2013, 09:03:37 AM by Sean De Jesus »
A person who never made a mistake never tried anything new. - Albert Einstein

Offline Sean De Jesus

  • VIP Moderator
  • Full Member
  • *
  • Posts: 139
  • Karma: +20/-1
  • Tablet / Size / Model: WonderMedia WM8850
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #34 on: December 08, 2013, 09:10:25 AM »
Just like to say how great this ROM is. Installed on a Benton BT-M708D which comes out of the analyzer as Eken_MID7_W70_GSL1680_Z7Z67-030A. I was having repeated battery flat problems (suddenly going completely flat) but now the battery consumption in unbelievably good.

Had to do the rear camera fix - easy.

Many thanks  :android-lol:

Hi!, I see you really enjoy the ROM huh?  :cool-android:

If you got some change there... Why not leave small Donation to TechKnow? It will be a BIG help for us to keep the site alive!  :android-wink:.

Thanks!
A person who never made a mistake never tried anything new. - Albert Einstein

Offline littlecengiz

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
  • Uber-Noobie

Offline littlecengiz

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
  • Uber-Noobie
USB Gamepad support?
« Reply #36 on: December 08, 2013, 11:26:27 PM »
Is there any USB gamepad support for this ROM?

i used this one: +Eken_MID10.1_W10A_8235_FT5406_alt3.fwc

Offline Xeon

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: Bricked M7206
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #37 on: December 09, 2013, 06:25:22 PM »
Hi guys , can anyone please assist me in my question :

Eken_MID10.1_W10A_8235_FT5406
Eken_MID10.1_W10A_8235_FT5406_alt
Eken_MID10.1_W10A_8235_FT5406_alt2
Eken_MID10.1_W10A_8235_FT5406_alt3

does alt1-2-3 mean alternate fw or are they actually different ?

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #38 on: December 09, 2013, 09:31:11 PM »
Hi guys , can anyone please assist me in my question :

Eken_MID10.1_W10A_8235_FT5406
Eken_MID10.1_W10A_8235_FT5406_alt
Eken_MID10.1_W10A_8235_FT5406_alt2
Eken_MID10.1_W10A_8235_FT5406_alt3

does alt1-2-3 mean alternate fw or are they actually different ?

they are different configurations of the fwc files .. same rom .. just different hardware setups
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline Xeon

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: Bricked M7206
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #39 on: December 10, 2013, 09:00:48 PM »
Hi Satcomranger , I hope you are well .

Iv flashed my tablet with the new uberoid . now my rear camera is showing upside down on the screen . I found the .fwc file of my device and opened It  as follows :

<?xml version="1.0" ?>
<!--本文件由FMaker自动生成,手动修改需谨慎。-->
<!--This file is generated by FMaker, don't modify it manually.-->
<!--负责人:朱裕明 YumZhu Tel-6226.-->
<product>
    <editor>Last edited by flashchen on 2012-10-30 15:48:16</editor>
    <modules>
        <DDR_TYPE name="参考板载信息" />
        <BOOTDEV name="NAND" />
        <TOUCH name="CTP10.1_FT5406_W10A" />
        <KEY_PAD name="默认" />
        <VIBRATE name="默认" />
        <SENSOR name="默认" />
        <CODEC name="默认" />
        <SPEAKER name="默认" />
        <BATTERY name="默认" />
    </modules>
    <ext>
        <cmd>+setenv wmt.display.param 2:5:18:1024:600:60</cmd>
        <cmd>+setenv wmt.display.pwm 10:50:1000:1000</cmd>
        <cmd>setenv wmt.camera.param 1:12:0:0:0:1:13:0:0:0:1</cmd>
        <cmd>setprop ro.wmt.ui.settings_remove ethernet</cmd>
    </ext>
    <auto />
</product>


can the "<cmd>setenv wmt.camera.param 1:12:0:0:0:1:13:0:0:0:1</cmd>" be changed in someway or something to correct my problem ?

thank you in advance .
« Last Edit: December 10, 2013, 09:04:24 PM by Xeon »

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #40 on: December 10, 2013, 09:15:41 PM »
Hi Satcomranger , I hope you are well .

Iv flashed my tablet with the new uberoid . now my rear camera is showing upside down on the screen . I found the .fwc file of my device and opened It  as follows :

<?xml version="1.0" ?>
<!--本文件由FMaker自动生成,手动修改需谨慎。-->
<!--This file is generated by FMaker, don't modify it manually.-->
<!--负责人:朱裕明 YumZhu Tel-6226.-->
<product>
    <editor>Last edited by flashchen on 2012-10-30 15:48:16</editor>
    <modules>
        <DDR_TYPE name="参考板载信息" />
        <BOOTDEV name="NAND" />
        <TOUCH name="CTP10.1_FT5406_W10A" />
        <KEY_PAD name="默认" />
        <VIBRATE name="默认" />
        <SENSOR name="默认" />
        <CODEC name="默认" />
        <SPEAKER name="默认" />
        <BATTERY name="默认" />
    </modules>
    <ext>
        <cmd>+setenv wmt.display.param 2:5:18:1024:600:60</cmd>
        <cmd>+setenv wmt.display.pwm 10:50:1000:1000</cmd>
        <cmd>setenv wmt.camera.param 1:12:0:0:0:1:13:0:0:0:1</cmd>
        <cmd>setprop ro.wmt.ui.settings_remove ethernet</cmd>
    </ext>
    <auto />
</product>


can the "<cmd>setenv wmt.camera.param 1:12:0:0:0:1:13:0:0:0:1</cmd>" be changed in someway or something to correct my problem ?

thank you in advance .

which fwc file did you use .. did u try any other one ?
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline Xeon

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: Bricked M7206
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #41 on: December 10, 2013, 09:21:41 PM »
my tablet is Eken_MID10.1_W10A_8235_FT5406

hence I used Eken_MID10.1_W10A_8235_FT5406.fwc

I saw that Eken_MID10.1_W10A_8235_FT5406 and Eken_MID10.1_W10A_8235_FT5406_alt is exactly the same .

im going to load Eken_MID10.1_W10A_8235_FT5406_alt2 and see . alt3 is for a different tablet model .

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #42 on: December 10, 2013, 09:25:19 PM »
my tablet is Eken_MID10.1_W10A_8235_FT5406

hence I used Eken_MID10.1_W10A_8235_FT5406.fwc

I saw that Eken_MID10.1_W10A_8235_FT5406 and Eken_MID10.1_W10A_8235_FT5406_alt is exactly the same .

im going to load Eken_MID10.1_W10A_8235_FT5406_alt2 and see . alt3 is for a different tablet model .
flash the stock rom  or at least look at its fwc file and see what the camera parameter is  .. no idea in the sting what would flip it right side up ..  the correct parameter wud be on your stodck rom ..
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline Xeon

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: Bricked M7206
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #43 on: December 10, 2013, 09:29:20 PM »

flash the stock rom  or at least look at its fwc file and see what the camera parameter is  .. no idea in the sting what would flip it right side up ..  the correct parameter wud be on your stodck rom ..
[/quote]

I flashed the stock rom from the eken site I downloaded and it still remains with the problem - rear camera facing upside down on screen .

this is from stock rom :

<?xml version="1.0" ?>
<!--本文件由FMaker自动生成,手动修改需谨慎。-->
<!--This file is generated by FMaker, don't modify it manually.-->
<!--负责人:朱裕明 YumZhu Tel-6226.-->
<product>
    <editor>Last edited by Administrator on 2013-01-10 19:35:47</editor>
    <modules>
        <DDR_TYPE name="参考板载信息" />
        <BOOTDEV name="NAND" />
        <TOUCH name="CTP10.1_FT5406_W10A" />
        <KEY_PAD name="默认" />
        <VIBRATE name="默认" />
        <SENSOR name="默认" />
        <CODEC name="默认" />
        <SPEAKER name="默认" />
        <BATTERY name="默认" />
        <MODEM name="无" />
    </modules>
    <ext>
        <cmd>+setenv wmt.display.param 2:5:18:1024:600:60</cmd>
        <cmd>+setenv wmt.display.pwm 10:50:1000:1000</cmd>
        <cmd>setenv wmt.camera.param 1:12:0:0:0:1:13:0:0:0:1</cmd>
        <cmd>setprop ro.wmt.ui.settings_remove ethernet</cmd>
        <cmd>setprop ro.wmt.brightness.min 100</cmd>
        <cmd>date -s `date +%Y%m%d%H%M.%S -r autorun.1.wmt`</cmd>
        <cmd>hwclock -w</cmd>
        <cmd>setenv wmt.misc.param 1:100000:2:[1500000:1300][1500000:1300]</cmd>
        <cmd>setenv wmt.display.tmr 78800:0:32:82:1024:30:15:30:600:16</cmd>
        <cmd>date -s `date +%Y%m%d%H%M.%S -r autorun.1.wmt`</cmd>
        <cmd>hwclock -w</cmd>
        <cmd>setenv wmt.misc.param 1:100000:2:[1500000:1300][1500000:1300]</cmd>
        <cmd>setenv wmt.display.tmr 78800:0:32:82:1024:30:15:30:600:16</cmd>
    </ext>
    <auto />
</product>


and this is from latest uberoid Eken_MID10.1_W10A_8235_FT5406.fwc :

<?xml version="1.0" ?>
<!--本文件由FMaker自动生成,手动修改需谨慎。-->
<!--This file is generated by FMaker, don't modify it manually.-->
<!--负责人:朱裕明 YumZhu Tel-6226.-->
<product>
    <editor>Last edited by flashchen on 2012-10-30 15:48:16</editor>
    <modules>
        <DDR_TYPE name="参考板载信息" />
        <BOOTDEV name="NAND" />
        <TOUCH name="CTP10.1_FT5406_W10A" />
        <KEY_PAD name="默认" />
        <VIBRATE name="默认" />
        <SENSOR name="默认" />
        <CODEC name="默认" />
        <SPEAKER name="默认" />
        <BATTERY name="默认" />
    </modules>
    <ext>
        <cmd>+setenv wmt.display.param 2:5:18:1024:600:60</cmd>
        <cmd>+setenv wmt.display.pwm 10:50:1000:1000</cmd>
        <cmd>setenv wmt.camera.param 1:12:0:0:0:1:13:0:0:0:1</cmd>
        <cmd>setprop ro.wmt.ui.settings_remove ethernet</cmd>
    </ext>
    <auto />
</product>

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #44 on: December 10, 2013, 09:34:41 PM »

flash the stock rom  or at least look at its fwc file and see what the camera parameter is  .. no idea in the sting what would flip it right side up ..  the correct parameter wud be on your stodck rom ..

I flashed the stock rom from the eken site I downloaded and it still remains with the problem - rear camera facing upside down on screen .

this is from stock rom :

<?xml version="1.0" ?>
<!--本文件由FMaker自动生成,手动修改需谨慎。-->
<!--This file is generated by FMaker, don't modify it manually.-->
<!--负责人:朱裕明 YumZhu Tel-6226.-->
<product>
    <editor>Last edited by Administrator on 2013-01-10 19:35:47</editor>
    <modules>
        <DDR_TYPE name="参考板载信息" />
        <BOOTDEV name="NAND" />
        <TOUCH name="CTP10.1_FT5406_W10A" />
        <KEY_PAD name="默认" />
        <VIBRATE name="默认" />
        <SENSOR name="默认" />
        <CODEC name="默认" />
        <SPEAKER name="默认" />
        <BATTERY name="默认" />
        <MODEM name="无" />
    </modules>
    <ext>
        <cmd>+setenv wmt.display.param 2:5:18:1024:600:60</cmd>
        <cmd>+setenv wmt.display.pwm 10:50:1000:1000</cmd>
        <cmd>setenv wmt.camera.param 1:12:0:0:0:1:13:0:0:0:1</cmd>
        <cmd>setprop ro.wmt.ui.settings_remove ethernet</cmd>
        <cmd>setprop ro.wmt.brightness.min 100</cmd>
        <cmd>date -s `date +%Y%m%d%H%M.%S -r autorun.1.wmt`</cmd>
        <cmd>hwclock -w</cmd>
        <cmd>setenv wmt.misc.param 1:100000:2:[1500000:1300][1500000:1300]</cmd>
        <cmd>setenv wmt.display.tmr 78800:0:32:82:1024:30:15:30:600:16</cmd>
        <cmd>date -s `date +%Y%m%d%H%M.%S -r autorun.1.wmt`</cmd>
        <cmd>hwclock -w</cmd>
        <cmd>setenv wmt.misc.param 1:100000:2:[1500000:1300][1500000:1300]</cmd>
        <cmd>setenv wmt.display.tmr 78800:0:32:82:1024:30:15:30:600:16</cmd>
    </ext>
    <auto />
</product>


and this is from latest uberoid Eken_MID10.1_W10A_8235_FT5406.fwc :

<?xml version="1.0" ?>
<!--本文件由FMaker自动生成,手动修改需谨慎。-->
<!--This file is generated by FMaker, don't modify it manually.-->
<!--负责人:朱裕明 YumZhu Tel-6226.-->
<product>
    <editor>Last edited by flashchen on 2012-10-30 15:48:16</editor>
    <modules>
        <DDR_TYPE name="参考板载信息" />
        <BOOTDEV name="NAND" />
        <TOUCH name="CTP10.1_FT5406_W10A" />
        <KEY_PAD name="默认" />
        <VIBRATE name="默认" />
        <SENSOR name="默认" />
        <CODEC name="默认" />
        <SPEAKER name="默认" />
        <BATTERY name="默认" />
    </modules>
    <ext>
        <cmd>+setenv wmt.display.param 2:5:18:1024:600:60</cmd>
        <cmd>+setenv wmt.display.pwm 10:50:1000:1000</cmd>
        <cmd>setenv wmt.camera.param 1:12:0:0:0:1:13:0:0:0:1</cmd>
        <cmd>setprop ro.wmt.ui.settings_remove ethernet</cmd>
    </ext>
    <auto />
</product>
[/quote]

well if the stock rom is WRONG  .. why do you expect uberoid to fix that ! 
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline logytech

  • Newbie
  • *
  • Posts: 1
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: MacSonic/7 inch/WM8850-MID
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #45 on: December 11, 2013, 08:45:49 AM »
Thank you for custow firmware bro... and thanks also for tips on dual camera fixes.... :android-smile:

Merry Xmas :xmas:

Offline jamespoo

  • Newbie
  • *
  • Posts: 12
  • Karma: +0/-0
  • Uber-Noobie
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #46 on: December 12, 2013, 08:15:00 AM »
hi after i installed the wrong firmware on my netbook it turns out it was for a tablet pc with very similar specs

it installed fine after it was done i turned the netbook back on and now its just showing a black screen and light comes on to show that it is turned on

its this netbook

http://www.aliexpress.com/item/Special-offer-10-inch-student-WIFI-mini-laptop-computer-VIA8650-800MHz-4GB-Windows-CE-6-0/616506565.html

i asked seller for the firmware they sent it to me so i when and put it on the sd card and then put it in the netbook and turned it on but it just turns on and show black screen and does nothing

please tell me i have not bricked this for good :( please tell me there is a way i might be able to fix it

Offline [email protected]

  • Newbie
  • *
  • Posts: 20
  • Karma: +2/-1
  • Yeah its me...
  • Tablet / Size / Model: DOMO SLATE X3D SE/ 7 inch/fwc name=MID7_8237_FT5306_4key_wgj7167
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #47 on: December 12, 2013, 12:32:30 PM »
does wm8850 support changing bootanimation by system/media/bootanimation/bootanimation.zip
but bootanimation.zip doesn't even exist here

or modifiying the boot.mov is enough

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #48 on: December 12, 2013, 05:38:43 PM »
does wm8850 support changing bootanimation by system/media/bootanimation/bootanimation.zip
but bootanimation.zip doesn't even exist here

or modifiying the boot.mov is enough

LEAVE IT ALONE this rom is not yours to fool with  .. read the terms and agreements of using it ...
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline cvegreen

  • VIP Moderator
  • Full Member
  • *
  • Posts: 199
  • Karma: +99/-0
  • Tablet / Size / Model: no tablet, asus F205TA netbook
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #49 on: December 15, 2013, 07:32:57 PM »
HcH, thx man,
 It works realy good on my 10" netbook. He feels faster than before, I had the problem that i ditn know with model he realy is because he was dead. Ik give it a tray and everything works fine now.  :android-lol:  :android-rules:

Offline zangun

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
  • Uber-Noobie
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #50 on: December 20, 2013, 08:17:35 AM »
Hi Hch and others admin, really great rom here for my wm8850 but unfortunate i have wifi problem..the wifi cant on..can someone teaach me how to make it work again..im using this fwc :

MID7_8278_ZET6221_TPC0495 ----------> this fwc can make my wifi work but the screen is larger for my 7" inch tab
MID7_8278_ZET6221_TPC0495_alt -----> this fwc ok, only wifi cant on
MID7_8278_ZET6221_TPC0495_alt2 ---> this fwc ok, only wifi cant on, currently im using this rom on my tab

#3 HowTo fix non working wifi:
* get a terminal emulator
* execute "wmtenv set wmt.gpo.wifi 6:1:6:0xD8110040:0xD8110080:0xD81100C0"
* reboot
* try wifi again

already done this step..but still cant on wifi..

someone here please help..tq..

Offline androx74

  • Newbie
  • *
  • Posts: 8
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: Eken W70/7"/GLSL1680
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #51 on: December 21, 2013, 01:52:24 PM »
Nice rom :) i tested it sometime ago. a thing may be of interest for 3g compatibility, add "Huawei E3131" it is compatible too with this firmware and all factory firmware

Offline rd3php

  • Jr. Member
  • **
  • Posts: 75
  • Karma: +1/-1
  • Tablet / Size / Model: WonderMedia WM8850-mid
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #52 on: December 23, 2013, 04:05:33 PM »

the problem the the hide status bar it hides automatically and didn't comes up how to solve this
Current Devices:-
WM8850-mid  Jellybean 4.1.1 Ver 1.2.0
AllWinner A10 Stock
Huawei G510  Stock

If I helped you, please click in "Thanks" :D

Offline Sean De Jesus

  • VIP Moderator
  • Full Member
  • *
  • Posts: 139
  • Karma: +20/-1
  • Tablet / Size / Model: WonderMedia WM8850
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #53 on: December 24, 2013, 08:38:22 PM »

the problem the the hide status bar it hides automatically and didn't comes up how to solve this

Hi,

Tap the bottom screen of your tablet.. something blue there should be visible when you tap it.. Pressing it will return back the status bar. I'll create a short video for this one soon.

Merry Christmas!
A person who never made a mistake never tried anything new. - Albert Einstein

Offline alejandroloisi

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
  • Uber-Noobie
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #54 on: December 25, 2013, 11:27:52 PM »
Hi
I have the NEXT problem. I do not see, and I do not know the model of my trable. But I installed the rom. Now my touch does not work. The most I've made ​​is that the work invested in the display.

I've tried almost all. Fwc but with the same result. The box my table has these data:
Sonivox Equinox VS-VS II Qx MID1106
model number: WM8850

I know that the problem is in the dirver TOUCH name but do not know if a version for my tablet is not available.
Please I need help.

PD: Sorry for my english  :'(

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #55 on: December 26, 2013, 01:35:44 AM »
Hi
I have the NEXT problem. I do not see, and I do not know the model of my trable. But I installed the rom. Now my touch does not work. The most I've made ​​is that the work invested in the display.

I've tried almost all. Fwc but with the same result. The box my table has these data:
Sonivox Equinox VS-VS II Qx MID1106
model number: WM8850

I know that the problem is in the dirver TOUCH name but do not know if a version for my tablet is not available.
Please I need help.

PD: Sorry for my english  :'(

If you followed the instructions you shud have ran the HcH toolkit .. please post what the model number was and please post the output files of the toolkit .!  The toolkit would have given you the model #
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline cyberspeed

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: WM8650
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #56 on: December 29, 2013, 12:34:40 AM »
I need a little help, i have a chinese tablet of a friend of mine that wasnt working at all, after messing around with parameters and such (had to change touch driver and camera values) i got everything working EXCEPT the Power button, i cant power on the tablet, lock it or anything, only way to power it on is resetting with the uberoid card inside so it flashes and reboots after, i cant get another like this one, and obviously, i dont have backup since my didnt do it and when i got the tablet, it wasnt working anymore, also, getting the stock rom is imposible, because the "brand" doesnt provide it, the model is "Midi Japan Midipad MD-7885HD", is something i can change with "wmtenv set" like i did with the camera to make it work? Thanks in advance.

EDIT: Also, when i reset it without the charger or uberoid sd, the screen keeps flickering between "OFF-Black-OFF-Black-OFF-Black...." but if i plug the charger in, the battery charge icon appears.

EDIT 2: In case needed my FWC:
<?xml version="1.0" ?>
<!--本文件由FMaker自动生成,手动修改需谨慎。-->
<!--This file is generated by FMaker, don't modify it manually.-->
<!--负责人: YumZhu Tel-6226.-->
<product model="MD7885" manufacture="Midi">
    <editor>Last edited by Speed on 2013-12-28 18:03:31</editor>
    <modules>
        <DDR_TYPE name="??????" />
        <BOOTDEV name="NAND" />
        <TOUCH name="ZET6221_ATC7031" />
        <KEY_PAD name="??" />
        <VIBRATE name="??" />
        <SENSOR name="mma7660gsensor_3" />
        <CODEC name="??" />
        <SPEAKER name="???-???" />
        <BATTERY name="??" />
        <MODEM name="?" />
    </modules>
    <ext>
        <cmd>setenv wmt.camera.param 1:13:0:0:0:1:12:0:0:0</cmd>
    </ext>
    <auto>
        <cmd>setprop ro.wmt.product midi-md7885</cmd>
    </auto>
</product>

EDIT 3: As a side note, not really important, but the settings ui shows the "bluetooth" option but i cant enable it, is there a way to disable this feature? I've seen another fwc with the line: <cmd>setprop ro.wmt.ui.settings_remove gps</cmd>, i can use it?
« Last Edit: December 29, 2013, 01:20:20 AM by cyberspeed »

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #57 on: December 29, 2013, 02:08:51 AM »
I need a little help, i have a chinese tablet of a friend of mine that wasnt working at all, after messing around with parameters and such (had to change touch driver and camera values) i got everything working EXCEPT the Power button, i cant power on the tablet, lock it or anything, only way to power it on is resetting with the uberoid card inside so it flashes and reboots after, i cant get another like this one, and obviously, i dont have backup since my didnt do it and when i got the tablet, it wasnt working anymore, also, getting the stock rom is imposible, because the "brand" doesnt provide it, the model is "Midi Japan Midipad MD-7885HD", is something i can change with "wmtenv set" like i did with the camera to make it work? Thanks in advance.

EDIT: Also, when i reset it without the charger or uberoid sd, the screen keeps flickering between "OFF-Black-OFF-Black-OFF-Black...." but if i plug the charger in, the battery charge icon appears.

EDIT 2: In case needed my FWC:
<?xml version="1.0" ?>
<!--本文件由FMaker自动生成,手动修改需谨慎。-->
<!--This file is generated by FMaker, don't modify it manually.-->
<!--负责人: YumZhu Tel-6226.-->
<product model="MD7885" manufacture="Midi">
    <editor>Last edited by Speed on 2013-12-28 18:03:31</editor>
    <modules>
        <DDR_TYPE name="??????" />
        <BOOTDEV name="NAND" />
        <TOUCH name="ZET6221_ATC7031" />
        <KEY_PAD name="??" />
        <VIBRATE name="??" />
        <SENSOR name="mma7660gsensor_3" />
        <CODEC name="??" />
        <SPEAKER name="???-???" />
        <BATTERY name="??" />
        <MODEM name="?" />
    </modules>
    <ext>
        <cmd>setenv wmt.camera.param 1:13:0:0:0:1:12:0:0:0</cmd>
    </ext>
    <auto>
        <cmd>setprop ro.wmt.product midi-md7885</cmd>
    </auto>
</product>

EDIT 3: As a side note, not really important, but the settings ui shows the "bluetooth" option but i cant enable it, is there a way to disable this feature? I've seen another fwc with the line: <cmd>setprop ro.wmt.ui.settings_remove gps</cmd>, i can use it?
Well we cant help you much either ..
you gave us the contents of the fwc file but what name is it ?
Is it the correct one for your tablet ?  or did you just pick one ? since it wasnt working when you got it !
Post the contents of the HcH toolkit BEFORE it was flashed  ..
Leave the rom alone  it is not your to fool with ..  if you have a bluetooth entry and no bluetooth  then you picked the wrong fwc file to begin with .. this tablet sounds like it has real problems and not with just a rom
if it wasnt working when you got it then what do you expect ?  Get the correct fwc file to begin with !
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline cyberspeed

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: WM8650
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #58 on: December 29, 2013, 07:33:51 AM »
I would really like to post the contents BEFORE it was flashed, but as i said, i received it bricked, so i cant really tell, i tried to find one exactly equal but failed, thats why im asking, and im not messing with any part of the rom, just using the tools YOU provide, for this purpose, i used the part 5 of the "HowTo Recover in case of a bad flash/HowTo use WonderMedia Android Device Analyzer" stating to set env arguments with a keyboard but i did it with adb since im really familiar with android devices, i didnt modify not a single file in the whole rom, so, im asking for help based on YOUR instructions and i would like to give you or just use the correct fwc but i just dont know wich one is.

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #59 on: December 29, 2013, 03:22:46 PM »
I would really like to post the contents BEFORE it was flashed, but as i said, i received it bricked, so i cant really tell, i tried to find one exactly equal but failed, thats why im asking, and im not messing with any part of the rom, just using the tools YOU provide, for this purpose, i used the part 5 of the "HowTo Recover in case of a bad flash/HowTo use WonderMedia Android Device Analyzer" stating to set env arguments with a keyboard but i did it with adb since im really familiar with android devices, i didnt modify not a single file in the whole rom, so, im asking for help based on YOUR instructions and i would like to give you or just use the correct fwc but i just dont know wich one is.

well your guess is as good as ours ..

all you can do is start with a generic fwc for your screen size ... then use fmaker in the firmwareinstall/comf directory get one item working and then keep going ..
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer