TechKnow

Author Topic: [WM8850] Universal Uberoid v3.1 JB 4.1.1 22NOV2013  (Read 79055 times)

0 Members and 2 Guests are viewing this topic.

Offline Geoff_H

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: 7 inch WM8850 Eken_Mid7
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #150 on: October 30, 2014, 05:49:22 PM »
A few questions....


HowTo Flash:
1. Run the Analyzer before you flash your tablet. Copy the included APK to a SD card and install the application on your tablet.
   1a. What is the included APK ?. I used "hch.techknow.toolkit.03apr2013.apk" and created the model.txt file. Is this correct ?

2. The Analyzer will show you the model info, it will also dump a file called model.txt on your SD (make sure you insert a SD when running to

write it!)
   No problems with this instruction line

3. Lookup the displayed/saved model in the "Uberoid Compatibility List" which you can find in this document.
   No problems with this instruction line

4. Open FirmwareInstall\config in Windows Explorer
   4a. Why Windows Explorer ? Where do I start to look ?. Using a file explorer app I couldn't find this directory

5. Remove the "+" marked .FWC file at the top of this directory
   5a. I coudn't find this directory

6. Look for the FWC file with your model name, prefix this filename with a "+"
   (E11D_F_4ddr_512M.fwc to +E11D_F_4ddr_512M.fwc)
   NOTE: Only one "+" prefixed file is allowed in this directory or the firmware will not start flashing!
   6a. No directory, so no file

7. Copy this ROM to your SD using the CHANGER, flash and ENJOY JELLYBEAN!
   7a. How do you use CHANGER ?. 7b. How do you Flash ?.

Download:
WM8850_Universal_Uberoid_v3.1_JB_4.1.1_22NOV2013-HcH.7z
   8a. What do I do with this .7z file ?

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #151 on: October 30, 2014, 05:53:11 PM »
you unzip the file  with  7Zip ... the config folder is in their !
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline Geoff_H

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: 7 inch WM8850 Eken_Mid7
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #152 on: October 30, 2014, 06:13:12 PM »
Where do I unzip the file to ?

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #153 on: October 30, 2014, 06:16:45 PM »
Where do I unzip the file to ?

your desktop or any foder you wish !
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline Geoff_H

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: 7 inch WM8850 Eken_Mid7
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #154 on: October 30, 2014, 07:17:11 PM »
Your instructions are absolutely pathetic, as is your use and knowledge of the English language.
This is one web site to avoid

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #155 on: October 30, 2014, 07:28:42 PM »
Your instructions are absolutely pathetic, as is your use and knowledge of the English language.
This is one web site to avoid

thanks  .. goodbye ..
it seems that you are the one that needs help .. if you have never seen a zip file ...nor lknow what to do with it .. then you have no business flashing a tablet ... we are all volunteer here .. not all are native english speakers and and we do the best we can  .. so just who is pathetic !
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline fsebentley

  • Uber Member
  • *****
  • Posts: 1720
  • Karma: +556/-0
  • Fiddlin with Androids
  • Tablet / Size / Model: 7 inch Generic Chinese : Allwinner : A13 Phonetab w/BT : A20 w/BT : IRULU A23 : Generic A31 w/BT
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #156 on: October 30, 2014, 10:11:54 PM »
Your instructions are absolutely pathetic, as is your use and knowledge of the English language.
This is one web site to avoid

I think we should help you with that... after all we are here to assist you  :android-lol:

I think your Computer Literacy is absolutely pathetic, the instructions assume that you have a modicum of Computer Knowledge, and have
read the FAQ's on flashing the firmware for your device as well as any other relevant instructions. As for grammar and punctuation
This is a forum, not an English Literacy class, furthermore you might be interested to learn that the Developer/Owner of the Forum
who wrote those instructions does not speak English as his Native Language, thus a few inconsistencies in his use of English
might be expected.

I do note that your "Questions" Read as a critique on the instructions and where they do address an inability to understand you do
not indicate that you actually Followed the instructions ... ie when instructed to use Windows Explorer you ignored the instruction and
indicate that you used a different application and were non specific in which one you used. If you cannot follow instructions, even
when the meaning is clear I do not think that correcting the English in them will help you.

With this attitude you are more than welcome to Go elsewhere, I would make a friendly suggestion that wherever you do go
you might consider refraining from your rude commentary on the assistance given as it may alienate someone  :cool-android: :x
Have you read the Posting Rules and the FAQ's for your device [you] ?
You Should consider a Donation [you]  :android-lol:

Offline twjordo

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 7444
  • Karma: +1416/-27
  • Tablet / Size / Model: =   :cool-android:    :android-wink:    :cool-android:
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #157 on: October 31, 2014, 04:05:04 PM »
 :android-lame:

Your instructions are absolutely pathetic, as is your use and knowledge of the English language.
This is one web site to avoid


we do not need members like this around here.... this totally drags the spirit right out of me reading such negative posts

the member got the file [or so I guess] so maybe they can figure it out on their own as I am banning them from TechKnow

Thanks satcomranger and fsebentley for trying to assist this arse but some ppl don't deserve to belong to TechKnow and this is a PRIME example of such.

Offline jotaherra

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: Netbook WM8850 1.5 Mhz
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #158 on: November 04, 2014, 10:50:39 PM »
Hi, I need your help,  :(I don´t find the fwd for my netbook wm8850, it is the exact model "Nstar NW_WM8200B1_CB_V1.1". I have been looking the compatibility list of Uberoid 3.1 and this model does´t appears, is there any way to get my netbook working again?  :android-cry:. Thank you.

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #159 on: November 04, 2014, 11:10:59 PM »
Hi, I need your help,  :(I don´t find the fwd for my netbook wm8850, it is the exact model "Nstar NW_WM8200B1_CB_V1.1". I have been looking the compatibility list of Uberoid 3.1 and this model does´t appears, is there any way to get my netbook working again?  :android-cry:. Thank you.

you need the  REAL fwc file from the device ..if you cannot obtain that from your tablet then we suggest you get the stock rom from your seller or manufaturer ..
otherwise it is just guess work at what  fwc file you need ... pick the wrong on  and you mioght  wind up with a brick ..
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline jotaherra

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: Netbook WM8850 1.5 Mhz
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #160 on: November 05, 2014, 06:43:20 AM »
Hi, I need your help,  :(I don´t find the fwd for my netbook wm8850, it is the exact model "Nstar NW_WM8200B1_CB_V1.1". I have been looking the compatibility list of Uberoid 3.1 and this model does´t appears, is there any way to get my netbook working again?  :android-cry:. Thank you.

you need the  REAL fwc file from the device ..if you cannot obtain that from your tablet then we suggest you get the stock rom from your seller or manufaturer ..
otherwise it is just guess work at what  fwc file you need ... pick the wrong on  and you mioght  wind up with a brick ..

thanks for answer me, but that is the main problem , I can´t get the stock rom from the seller, a friend gave me this netbook, and he got it from second hand and he doesn´t know what is the seller or manufacturer.

Offline twjordo

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 7444
  • Karma: +1416/-27
  • Tablet / Size / Model: =   :cool-android:    :android-wink:    :cool-android:
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #161 on: November 05, 2014, 02:02:04 PM »
Hi, I need your help,  :(I don´t find the fwd for my netbook wm8850, it is the exact model "Nstar NW_WM8200B1_CB_V1.1". I have been looking the compatibility list of Uberoid 3.1 and this model does´t appears, is there any way to get my netbook working again?  :android-cry:. Thank you.

you need the  REAL fwc file from the device ..if you cannot obtain that from your tablet then we suggest you get the stock rom from your seller or manufaturer ..
otherwise it is just guess work at what  fwc file you need ... pick the wrong on  and you mioght  wind up with a brick ..

thanks for answer me, but that is the main problem , I can´t get the stock rom from the seller, a friend gave me this netbook, and he got it from second hand and he doesn´t know what is the seller or manufacturer.

Uberoid does support many models - not knowing the exact model info could mean flashing it many times to find compatible configuration but being a netbook you do not have to worry with touchscreen

flash at your own risk ofc as flashing the wrong config could damage the device

Offline jotaherra

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: Netbook WM8850 1.5 Mhz
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #162 on: November 05, 2014, 05:18:42 PM »
Hi, I need your help,  :(I don´t find the fwd for my netbook wm8850, it is the exact model "Nstar NW_WM8200B1_CB_V1.1". I have been looking the compatibility list of Uberoid 3.1 and this model does´t appears, is there any way to get my netbook working again?  :android-cry:. Thank you.

you need the  REAL fwc file from the device ..if you cannot obtain that from your tablet then we suggest you get the stock rom from your seller or manufaturer ..
otherwise it is just guess work at what  fwc file you need ... pick the wrong on  and you mioght  wind up with a brick ..

thanks for answer me, but that is the main problem , I can´t get the stock rom from the seller, a friend gave me this netbook, and he got it from second hand and he doesn´t know what is the seller or manufacturer.

Uberoid does support many models - not knowing the exact model info could mean flashing it many times to find compatible configuration but being a netbook you do not have to worry with touchscreen

flash at your own risk ofc as flashing the wrong config could damage the device

Thanks again, better, I´ll continue  looking for the stock rom because I don´t want brick my netbook.

Offline HcH

  • TechKnow Owner, Ethical Hacker
  • Administrator
  • Uber Member
  • *****
  • Posts: 9947
  • Karma: +2285/-111
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #163 on: November 06, 2014, 01:19:19 PM »
Hey jotaherra,

read the FAQ and look for the topic on getting the FWC from your model!

BTW, Netbooks are harder to mess up than tablets due the absence of the TS :)

BTW#2, flashing Uberoid is WAY safer than factory firmware!

HcH

Offline cvegreen

  • VIP Moderator
  • Full Member
  • *
  • Posts: 199
  • Karma: +99/-0
  • Tablet / Size / Model: no tablet, asus F205TA netbook
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #164 on: November 06, 2014, 06:12:25 PM »
my netbook runs also on HCH his wonderfull uberoid 3.1 latest version.
I have a generic  WM8850 1.2 Ghz 512 MB ram 10" netbook and i took from the long list the
 E-MID10.1_W10A_8235_FT5406  fwc file and he runs verry good, a bit slow but that not the fault off HCH hiss uberoid because he runs now better than with the stock rom.

Offline evelhorn

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: pipo u8, ds7, pipo s1, maylong 270
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #165 on: January 02, 2015, 02:08:42 AM »
Hi, I've flashed this to my maylong m270 that was password locked. Having no volume keys I had to reflash it to get past the forgotten pin code. To make matters worse there was no way to download the factory firmware due to broken link. On to my problem, the touch screen doesn't work, a usb mouse does and everything else other than the tc seems to work correctly. I have tried every rom on this forum for this type tablet. I ran WM-Explorer and Eken_MID7_W70_GSL1680_Z7Z67-030A came back so this was the last rom I flashed after locating it in the list. Does anyone know of a way to get the tc working correctly? Thanks

Or the correct firmware

oh, it's a Maylong m270c1205, according to the box
« Last Edit: January 02, 2015, 03:01:21 AM by evelhorn »

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #166 on: January 02, 2015, 05:19:24 AM »
Hi, I've flashed this to my maylong m270 that was password locked. Having no volume keys I had to reflash it to get past the forgotten pin code. To make matters worse there was no way to download the factory firmware due to broken link. On to my problem, the touch screen doesn't work, a usb mouse does and everything else other than the tc seems to work correctly. I have tried every rom on this forum for this type tablet. I ran WM-Explorer and Eken_MID7_W70_GSL1680_Z7Z67-030A came back so this was the last rom I flashed after locating it in the list. Does anyone know of a way to get the tc working correctly? Thanks

Or the correct firmware

oh, it's a Maylong m270c1205, according to the box

No idea what fwc file you need.........   that is in your  stock rom   
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline tohowalk

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
  • Uber-Noobie
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #167 on: January 20, 2015, 10:40:19 PM »
I've tried downloading this with three different browsers, and I can't get the file. Instead, I get an error message that the link is attempting to re-direct in a way that will never complete. Anyone have a suggestion? Cookies are set to allow in all cases.

Tia!

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #168 on: January 20, 2015, 11:09:32 PM »
I've tried downloading this with three different browsers, and I can't get the file. Instead, I get an error message that the link is attempting to re-direct in a way that will never complete. Anyone have a suggestion? Cookies are set to allow in all cases.

Tia!

There is nothing wrong with the link ... i just downloaded it .. using chrome .. no issues .. no redirects ..
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline tohowalk

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
  • Uber-Noobie
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #169 on: January 20, 2015, 11:23:40 PM »
I just installed chrome and tried with that, and I get an error message that says the page has a redirect loop. Still no luck. Very frustrating!

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #170 on: January 20, 2015, 11:38:59 PM »
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline tohowalk

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
  • Uber-Noobie
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #171 on: January 20, 2015, 11:44:15 PM »
Thank you so much Satcomranger - that worked like a charm!

Offline Lepalma

  • Newbie
  • *
  • Posts: 9
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: Hipstreet Flare HS-9DTB4-4GB
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #172 on: January 26, 2015, 04:21:27 AM »
Dears

i dont find my model Eken_MID7_W70_GSL1680_FYL6053V01 in the Uberoid list and config folder, but i find in other FTP a file named W70-1680-HI253-4.1-1.3.5-0502.rar with +Eken_MID7_W70_GSL1680_FYL6053V01.fwc , can only copy this file in the config folder of Uberoid ?? What i do?

Offline HcH

  • TechKnow Owner, Ethical Hacker
  • Administrator
  • Uber Member
  • *****
  • Posts: 9947
  • Karma: +2285/-111
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #173 on: January 26, 2015, 10:45:21 AM »
Dears

i dont find my model Eken_MID7_W70_GSL1680_FYL6053V01 in the Uberoid list and config folder, but i find in other FTP a file named W70-1680-HI253-4.1-1.3.5-0502.rar with +Eken_MID7_W70_GSL1680_FYL6053V01.fwc , can only copy this file in the config folder of Uberoid ?? What i do?
Hey Lepalma,

Yes you can do that, or better:

You can get the FWC on your original firmware in \system\wmtapp\MODELNAME.FWC, copy it and use it to flash. Please also share your unsupported model here on TechKnow with us so I can include your model in the next release :)

Cheers,

HcH

Offline Yuun Yii

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: WM8850-MID
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #174 on: January 29, 2015, 09:24:29 AM »
Hi all.

I have a WM8850 netbook, and using the Anaylser tool I found the model of my device. However I could not find it in the Uberoid compatibility list. I did, however, find a fwc file online that does have some of the same lines in the model.txt extracted from my device. I'm new to flashing firmware onto my device, so all this stuff about a FirmwareInstall folder is all news to me.

FWC file: http://www.iviewus.com/download/firmware/706NB/FirmwareInstall/config/PID10_8199_normal.fwc

The FWC file here does not have all the things listed in the model.txt from my device though, so I am not sure.

Here is my model.txt:

Code: [Select]
Android Device Analyzer by HcH output

Model
wmt.model.no
PID10_8199_normal
G-Sensor 8650
wmt.gpt.gsensor
wmt.io.gsensor
G-Sensor 8850
wmt.io.kxte9gsensor
wmt.io.mc3230sensor
wmt.io.dm08sensor
wmt.io.d06sensor
wmt.io.mma7660gsensor
wmt.io.dm10sensor
wmt.gpt.gsensor
Camera
wmt.camera.param
1:12:0:0:0:0:0:0:0:0
wmt.camera.i2c_gpio
Hardware Keys
wmt.sys.keypad
wmt.gpo.wifi
6:1:6:0xD8110040:0xD8110080:0xD81100C0
Touchscreen
wmt.io.touch
wmt.io.ts.2dcal

Would anyone be able to have a look at the FWC listed and tell me if it might work with my device? Am I able to use it to flash Uberoid? Because it doesn't have all the lines listed in the model.txt, so I'm confused.

Also I have no idea what the "[TOOL] Trojan.ServStart.Cleaner.v1.2-HcH" and the "[TOOL] TechKnow.ToolKit.App-HcH" folders are except that my scanner picked up a virus in the Trojan folder. Could anyone tell me what they are for?

Thanks for any help.

EDIT: Found another fwc from a firmware that looked better suited to my model.

Code: [Select]
<?xml version="1.0" ?>
<!--本文件由FMaker自动生成,手动修改需谨慎。-->
<!--This file is generated by FMaker, don't modify it manually.-->
<!--负责人:朱裕明 YumZhu Tel-6226.-->
<product>
    <editor>Last edited by Ruanyj on 2012-10-16 19:04:02</editor>
    <modules>
        <DDR_TYPE name="参考板载信息" />
        <BOOTDEV name="NAND" />
        <TOUCH name="无" />
        <KEY_PAD name="无" />
        <VIBRATE name="无" />
        <SENSOR name="无" />
        <CODEC name="默认" />
        <SPEAKER name="默认" />
        <BATTERY name="默认" />
    </modules>
    <ext>
        <cmd>+setenv wmt.display.param 2:2:24:1024:600:60</cmd>
        <cmd>+setenv wmt.display.tmr 53333:0:32:160:1024:160:10:23:600:12</cmd>
        <cmd>setenv wmt.camera.i2c_gpio</cmd>
        <cmd>setenv wmt.camera.param 1:12:0:0:0:0:0:0:0:0</cmd>
        <cmd>+setenv wmt.display.pwm 10:50:1000:1000</cmd>
        <cmd>setenv wmt.gpo.wifi 6:1:6:0xD8110040:0xD8110080:0xD81100C0</cmd>
        <cmd>setprop ro.wmt.drv.remove gsensor_kxte9_md</cmd>
        <cmd>setprop ro.wmt.ui.softkeypad 1</cmd>
        <cmd>setprop ro.wmt.3g.reconnect 1</cmd>
        <cmd>setprop ro.wmt.touchpannel 1</cmd>
        <cmd>setprop ro.product.model 1010NB</cmd>
    </ext>
    <auto />
</product>
« Last Edit: January 29, 2015, 09:56:43 AM by Yuun Yii »

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #175 on: January 29, 2015, 04:39:37 PM »
Sorry but this section is closed ..please search the forum .. there is a way to extract the fwc from the device and use it to flash ..  otherwise .. if the fwc file is not in the uberoid list then it is not supported ..
as a matter of fact the location of the fwc file is just before your post ..

Section is CLOSED !
« Last Edit: January 29, 2015, 05:25:06 PM by satcomranger »
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline gspitman

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
  • Uber-Noobie
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #176 on: January 31, 2015, 06:33:21 AM »
I must  be an idiot... but I don't see HOW to flash this.  I have it on the SD and rebooted the device.  Is there more to it? Please forgive my ignorance.

Offline cvegreen

  • VIP Moderator
  • Full Member
  • *
  • Posts: 199
  • Karma: +99/-0
  • Tablet / Size / Model: no tablet, asus F205TA netbook
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #177 on: January 31, 2015, 02:56:05 PM »
I must  be an idiot... but I don't see HOW to flash this.  I have it on the SD and rebooted the device.  Is there more to it? Please forgive my ignorance.

Your device must be IN the charger to for flashing your ROM. Read the FAQ

Offline Try4Gold

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
  • Uber-Noobie
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #178 on: February 01, 2015, 08:35:36 PM »
I have the Craig TV stick (WM8850). I successfully flashed Uberoid and while in the process of trying to add Kodi (and failing) I decide to reflash Uberoid onto the stick because I wanted a fresh start, I also decided to edit the fwc file believing I could tweak a setting or 2 but now I have a black screen after trying the flash...any suggestions?

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [LATEST] WM8850 Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Reply #179 on: February 01, 2015, 08:46:33 PM »
I have the Craig TV stick (WM8850). I successfully flashed Uberoid and while in the process of trying to add Kodi (and failing) I decide to reflash Uberoid onto the stick because I wanted a fresh start, I also decided to edit the fwc file believing I could tweak a setting or 2 but now I have a black screen after trying the flash...any suggestions?

Section is CLOSED ...put the fwc back the way it was ...
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer