TechKnow

Author Topic: [WINDOWS SCRIPT] AllWinner A13 Rom Dumper (Rom Backup Tool)  (Read 73694 times)

0 Members and 1 Guest are viewing this topic.

Offline c345y

  • Full Member
  • ***
  • Posts: 142
  • Karma: +9/-3
  • Uber-Noobie
  • Tablet / Size / Model: A13-MID/7/A13
Re: [TOOL] A13 Rom Dumper
« Reply #90 on: October 04, 2012, 04:57:59 AM »
I would like to try it, if u don't mind uploading it that would be gr8
Thank you

done uploading,

https://hotfile.com/dl/174840906/d911cd9/goodix811mxc622x.img.html

please do give me some feedback :D hope can helps u

 :android-shocked:
It works. Thank you very much. All is working perfectly. Touch and rotation is working. Screen is good.
Good job. Thank you.
WM8650 - Uberoid ROM / Green Led / Android 2.2 / 7" / 3000mAh
Ainovo Paladin - Original Rom / Android 4.0.3 / 7" A8 512MB RAM 4GB ROM/ 4200mAh
Cube U9GT2 - Original Rom / Android 4.0.3 / 9.7" A9 1GB ROM 8GB RAM / 10000mAh
A13/Q88 - Goodix811+Mxc622x / Android 4.0.4 / 7" A13B 512MB RAM 4GB ROM / 4000mAh
Vimicro - Original Rom / Android 2.3 / 8" A8 1GB RAM 8GB ROM / 5000mAh

Offline c345y

  • Full Member
  • ***
  • Posts: 142
  • Karma: +9/-3
  • Uber-Noobie
  • Tablet / Size / Model: A13-MID/7/A13
Re: [TOOL] A13 Rom Dumper
« Reply #91 on: October 04, 2012, 04:59:44 AM »
to c345y

i am making one final attempt at building your img file from your original rom dump that you posted
here:  http://www.techknow.t0xic.nl/forum/index.php?topic=3366.msg39871#msg39871
we will not make any other roms unless a original rom dump is provided ..
here is a link to the init.sun5i.rc file that i pulled from your boot.img it will assist you in finding what drivers are being used :  http://www.4shared.com/file/3lUMX7gC/initsun5i.html
here is a link to your build.prop and it contains the closest thing to a name of your tablet that can be found:  http://www.4shared.com/file/qsC3NhRz/build.html

link to image:   http://www.4shared.com/file/asL-O48P/c345y_build_10032012_1427.html

only use linux friendly editors .. for windows use program notepad ++
http://notepad-plus-plus.org/
do not use the windows notepad to edit the files it will break them !

Thank you for your time.
BUt this time it cannot load.   :android-sad: :android-sad: I cannot load this firmware, always fail while updating.
thank you very much.
WM8650 - Uberoid ROM / Green Led / Android 2.2 / 7" / 3000mAh
Ainovo Paladin - Original Rom / Android 4.0.3 / 7" A8 512MB RAM 4GB ROM/ 4200mAh
Cube U9GT2 - Original Rom / Android 4.0.3 / 9.7" A9 1GB ROM 8GB RAM / 10000mAh
A13/Q88 - Goodix811+Mxc622x / Android 4.0.4 / 7" A13B 512MB RAM 4GB ROM / 4000mAh
Vimicro - Original Rom / Android 2.3 / 8" A8 1GB RAM 8GB ROM / 5000mAh

Offline kzrash

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: MD 7 Q88A13
Re: [TOOL] A13 Rom Dumper
« Reply #92 on: October 04, 2012, 07:53:19 AM »
Hey Can you make thise image for ELAN KTF2127 TS driver pleas, in russian forum i know 15-20 people hwo have a problem with thise stuss, and me too/

Offline erdilmeet

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: A13 MID
Re: [TOOL] A13 Rom Dumper
« Reply #93 on: October 04, 2012, 09:40:28 AM »
Really Awesome Job and tools on this site!! I am now working on my A13 MID tablet so would post details soon! But currently I am searching howto's a lot as Android development is something fantastic to kill time and reap benefits! Cheero for the good work though!

Offline opti

  • Newbie
  • *
  • Posts: 21
  • Karma: +7/-0
  • Uber-Noobie
  • Tablet / Size / Model: all winner / 7" / A13
Re: [TOOL] A13 Rom Dumper
« Reply #94 on: October 04, 2012, 10:14:37 AM »
Hi eumario here are the pictures of the tablet

Offline c345y

  • Full Member
  • ***
  • Posts: 142
  • Karma: +9/-3
  • Uber-Noobie
  • Tablet / Size / Model: A13-MID/7/A13
Re: [TOOL] A13 Rom Dumper
« Reply #95 on: October 04, 2012, 10:54:59 AM »
Hi eumario here are the pictures of the tablet

this is exactly same like mine.  :android-lol:
WM8650 - Uberoid ROM / Green Led / Android 2.2 / 7" / 3000mAh
Ainovo Paladin - Original Rom / Android 4.0.3 / 7" A8 512MB RAM 4GB ROM/ 4200mAh
Cube U9GT2 - Original Rom / Android 4.0.3 / 9.7" A9 1GB ROM 8GB RAM / 10000mAh
A13/Q88 - Goodix811+Mxc622x / Android 4.0.4 / 7" A13B 512MB RAM 4GB ROM / 4000mAh
Vimicro - Original Rom / Android 2.3 / 8" A8 1GB RAM 8GB ROM / 5000mAh

Offline twjordo

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 7444
  • Karma: +1416/-27
  • Tablet / Size / Model: =   :cool-android:    :android-wink:    :cool-android:
Re: [TOOL] A13 Rom Dumper
« Reply #96 on: October 04, 2012, 12:26:24 PM »
please beware for the externals of alot of different tablets are identical but it is what's inside that counts  ;)

Offline hazard_puppet

  • Newbie
  • *
  • Posts: 11
  • Karma: +5/-0
  • Uber-Noobie
  • Tablet / Size / Model: A13 / 7inch / Clone
Re: [TOOL] A13 Rom Dumper
« Reply #97 on: October 04, 2012, 02:46:32 PM »
I would like to try it, if u don't mind uploading it that would be gr8
Thank you

done uploading,

https://hotfile.com/dl/174840906/d911cd9/goodix811mxc622x.img.html

please do give me some feedback :D hope can helps u

 :android-shocked:
It works. Thank you very much. All is working perfectly. Touch and rotation is working. Screen is good.
Good job. Thank you.



so my .img worked for u? good to hear that  :android-inlove:

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [TOOL] A13 Rom Dumper
« Reply #98 on: October 04, 2012, 05:48:03 PM »
Hey Can you make thise image for ELAN KTF2127 TS driver pleas, in russian forum i know 15-20 people hwo have a problem with thise stuss, and me too/

no we need the original rom dump from the tablet when it was working out of the box .. nothing else will do ..
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [TOOL] A13 Rom Dumper
« Reply #99 on: October 04, 2012, 06:11:11 PM »
to c345y

i am making one final attempt at building your img file from your original rom dump that you posted
here:  http://www.techknow.t0xic.nl/forum/index.php?topic=3366.msg39871#msg39871
we will not make any other roms unless a original rom dump is provided ..
here is a link to the init.sun5i.rc file that i pulled from your boot.img it will assist you in finding what drivers are being used :  http://www.4shared.com/file/3lUMX7gC/initsun5i.html
here is a link to your build.prop and it contains the closest thing to a name of your tablet that can be found:  http://www.4shared.com/file/qsC3NhRz/build.html

link to image:   http://www.4shared.com/file/asL-O48P/c345y_build_10032012_1427.html

only use linux friendly editors .. for windows use program notepad ++
http://notepad-plus-plus.org/
do not use the windows notepad to edit the files it will break them !

Thank you for your time.
BUt this time it cannot load.   :android-sad: :android-sad: I cannot load this firmware, always fail while updating.
thank you very much.

well that is odd .. it is the same rom as it was  from the previous rom i built .. except this time i opened up the boot.img to copy your init.sun5i.rc file ???
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline HcH

  • TechKnow Owner, Ethical Hacker
  • Administrator
  • Uber Member
  • *****
  • Posts: 9946
  • Karma: +2285/-111
Re: [TOOL] A13 Rom Dumper
« Reply #100 on: October 04, 2012, 07:10:40 PM »
Far as I've seen, you probably have seen it also, the firmware does have all the TS drivers, but just one can be loaded. The init.sun5i.rc insmods a driver ko file, so copying this file from another tablet very well could fix the ts driver problem.

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [TOOL] A13 Rom Dumper
« Reply #101 on: October 04, 2012, 07:18:19 PM »
yes and even other ones
this one is a mystery to me ..this came out of c345y  init.sun5i.rc   no idea what it is and havent seen it in my tab or any of the other roms i have looked at ..googled it and came up with notta

#szg_start
   insmod /suzhiguo.ko



Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline eumario

  • Newbie
  • *
  • Posts: 21
  • Karma: +10/-0
  • Uber-Noobie
  • Tablet / Size / Model: Allwinner / 7" / A13-MID Generic Clone
Re: [TOOL] A13 Rom Dumper
« Reply #102 on: October 05, 2012, 01:45:08 AM »
Hey Opti,

Just on a wild chance here, try this rom, this is a factory copy of my rom, just on the off chance that it may or may not work.

http://dl.dropbox.com/u/20797604/A13-MID/A13-MID_nuclear_pfdq88c-eng-IMM76D-Factory_Image.img

Currently, in that image, I believe I have sdcard and extsd swapped around, due to the issues I'm having with internal sd not working.  Let me know if it works or not.

Offline twjordo

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 7444
  • Karma: +1416/-27
  • Tablet / Size / Model: =   :cool-android:    :android-wink:    :cool-android:
Re: [TOOL] A13 Rom Dumper
« Reply #103 on: October 05, 2012, 02:27:53 AM »
this one is a mystery to me

#szg_start
   insmod /suzhiguo.ko

it looks like it is maybe support for szg player/editor  :android-question:

here is my source

suzhiguo is some developer maybe ???? suzhiguo  :android-question:
« Last Edit: October 05, 2012, 02:32:18 AM by twjordo »

Offline eumario

  • Newbie
  • *
  • Posts: 21
  • Karma: +10/-0
  • Uber-Noobie
  • Tablet / Size / Model: Allwinner / 7" / A13-MID Generic Clone
Re: [TOOL] A13 Rom Dumper
« Reply #104 on: October 05, 2012, 07:34:42 AM »
Woot!

After much looking through the files of my RomDump, and major modifications after going through all the stuff on the Uberoid v1.0 rom, I have finally gotten my tablet back to fully working condition, with Internal SD working, Rotation working, and Touch Screen working. :-)  Yay!

Offline c345y

  • Full Member
  • ***
  • Posts: 142
  • Karma: +9/-3
  • Uber-Noobie
  • Tablet / Size / Model: A13-MID/7/A13
Re: [TOOL] A13 Rom Dumper
« Reply #105 on: October 05, 2012, 08:59:19 AM »
Woot!

After much looking through the files of my RomDump, and major modifications after going through all the stuff on the Uberoid v1.0 rom, I have finally gotten my tablet back to fully working condition, with Internal SD working, Rotation working, and Touch Screen working. :-)  Yay!

glad to hear that. congratz. :android-party:
WM8650 - Uberoid ROM / Green Led / Android 2.2 / 7" / 3000mAh
Ainovo Paladin - Original Rom / Android 4.0.3 / 7" A8 512MB RAM 4GB ROM/ 4200mAh
Cube U9GT2 - Original Rom / Android 4.0.3 / 9.7" A9 1GB ROM 8GB RAM / 10000mAh
A13/Q88 - Goodix811+Mxc622x / Android 4.0.4 / 7" A13B 512MB RAM 4GB ROM / 4000mAh
Vimicro - Original Rom / Android 2.3 / 8" A8 1GB RAM 8GB ROM / 5000mAh

Offline opti

  • Newbie
  • *
  • Posts: 21
  • Karma: +7/-0
  • Uber-Noobie
  • Tablet / Size / Model: all winner / 7" / A13
Re: [TOOL] A13 Rom Dumper
« Reply #106 on: October 05, 2012, 11:37:20 AM »
Eumario,

Thx for the upload but unlucky for me it hangs on the android screen, i think the best rom i have had so far is sun5i_android_a13-pfdq88_V1.5_0816_20120818_040501A  every thing seems to work apart from ts and rotation using a mouse works fine also
sd card works fine too. thx for all your help..  :O  rotaion seems to work now also for this rom above. only thing now is the touch screen :D..
« Last Edit: October 05, 2012, 03:03:05 PM by opti »

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [TOOL] A13 Rom Dumper
« Reply #107 on: October 05, 2012, 05:56:40 PM »
Woot!

After much looking through the files of my RomDump, and major modifications after going through all the stuff on the Uberoid v1.0 rom, I have finally gotten my tablet back to fully working condition, with Internal SD working, Rotation working, and Touch Screen working. :-)  Yay!

glad to hear it!
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline opti

  • Newbie
  • *
  • Posts: 21
  • Karma: +7/-0
  • Uber-Noobie
  • Tablet / Size / Model: all winner / 7" / A13
Re: [TOOL] A13 Rom Dumper
« Reply #108 on: October 05, 2012, 06:00:14 PM »
hi satcomranger,

 is there any chance u could injet other ts drivers into this image ? sun5i_android_a13-pfdq88_V1.5_0816_20120818_040501A
thx .

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [TOOL] A13 Rom Dumper
« Reply #109 on: October 05, 2012, 06:12:16 PM »
hi satcomranger,

 is there any chance u could injet other ts drivers into this image ? sun5i_android_a13-pfdq88_V1.5_0816_20120818_040501A
thx .

do you have any idea what touchscreen controller is being used in your tablet ?  Without knowing i probably could inject all the drivers .. but then that may also have upredictable results ..and trying to get the right combination wud be endless hours trying to figure out ..
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline opti

  • Newbie
  • *
  • Posts: 21
  • Karma: +7/-0
  • Uber-Noobie
  • Tablet / Size / Model: all winner / 7" / A13
Re: [TOOL] A13 Rom Dumper
« Reply #110 on: October 05, 2012, 07:49:51 PM »
i stripped it down to look at the chips on the pcb but cant see owt like a name, is there any hardware profileing software for android u know of ? thx

btw if u dont mind putting all them into the firmware i could give it a shot :-) thx again.

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [TOOL] A13 Rom Dumper
« Reply #111 on: October 05, 2012, 08:02:50 PM »
i stripped it down to look at the chips on the pcb but cant see owt like a name, is there any hardware profileing software for android u know of ? thx

btw if u dont mind putting all them into the firmware i could give it a shot :-) thx again.

try android system information or elixr2 .. may tell you wht it is ..
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline opti

  • Newbie
  • *
  • Posts: 21
  • Karma: +7/-0
  • Uber-Noobie
  • Tablet / Size / Model: all winner / 7" / A13
Re: [TOOL] A13 Rom Dumper
« Reply #112 on: October 05, 2012, 08:26:05 PM »
tried them no sign of controller will keep looking and let u know if i find owt thx :D

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [TOOL] A13 Rom Dumper
« Reply #113 on: October 05, 2012, 09:03:16 PM »
tried them no sign of controller will keep looking and let u know if i find owt thx :D

FYI -- Here is your original init.sun5i.rc ..... this is where most of your drivers are loaded ..
the one that are proceeded with a #  do not get loaded
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [TOOL] A13 Rom Dumper
« Reply #114 on: October 05, 2012, 11:57:39 PM »
i stripped it down to look at the chips on the pcb but cant see owt like a name, is there any hardware profileing software for android u know of ? thx

btw if u dont mind putting all them into the firmware i could give it a shot :-) thx again.

here is an img file with all ts drivers loaded may or may not work!

http://www.4shared.com/file/AkqlhnSW/opti_alltsdrivers_10052012_144.html
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline hazard_puppet

  • Newbie
  • *
  • Posts: 11
  • Karma: +5/-0
  • Uber-Noobie
  • Tablet / Size / Model: A13 / 7inch / Clone
Re: [TOOL] A13 Rom Dumper
« Reply #115 on: October 06, 2012, 08:26:51 AM »
i stripped it down to look at the chips on the pcb but cant see owt like a name, is there any hardware profileing software for android u know of ? thx

btw if u dont mind putting all them into the firmware i could give it a shot :-) thx again.

here is an img file with all ts drivers loaded may or may not work!

http://www.4shared.com/file/AkqlhnSW/opti_alltsdrivers_10052012_144.html


did u change the value in the bootfs, script.bin and script0.bin + COMMON  _SYS_CONFIG100000.fex? from my understanding, just putting the line insmod in the init.sun5i.rc wont do the job.

cheers, correct me if i am wrong  :android-rules:

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [TOOL] A13 Rom Dumper
« Reply #116 on: October 06, 2012, 05:22:19 PM »
i stripped it down to look at the chips on the pcb but cant see owt like a name, is there any hardware profileing software for android u know of ? thx

btw if u dont mind putting all them into the firmware i could give it a shot :-) thx again.

here is an img file with all ts drivers loaded may or may not work!

http://www.4shared.com/file/AkqlhnSW/opti_alltsdrivers_10052012_144.html


did u change the value in the bootfs, script.bin and script0.bin + COMMON  _SYS_CONFIG100000.fex? from my understanding, just putting the line insmod in the init.sun5i.rc wont do the job.

cheers, correct me if i am wrong  :android-rules:

look thru the rom kitchen from miniand .. nowhere does it mention touching these files at all .. and they added drivers that didnt even exist on the tablet ..i also read that post you listed when you fixed your tab and what i gather is  that it only covered tablets that have inverted or shifted screen ..we dont even know what touch controller even works for opti ..the post didnt even mention anything about option A which is touch screen doesnt work at all ...so dont know
« Last Edit: October 06, 2012, 06:09:21 PM by satcomranger »
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline c345y

  • Full Member
  • ***
  • Posts: 142
  • Karma: +9/-3
  • Uber-Noobie
  • Tablet / Size / Model: A13-MID/7/A13
Re: [TOOL] A13 Rom Dumper
« Reply #117 on: October 07, 2012, 04:38:37 AM »
I have another Firmware from my supplier.
I've tried this, but the rotation not working with me. maybe will work with someone here.

http://www.4shared.com/file/Tv7dscjd/Q8_2127-V4_0309_0912_20120918.html

have a try.

thanks.
WM8650 - Uberoid ROM / Green Led / Android 2.2 / 7" / 3000mAh
Ainovo Paladin - Original Rom / Android 4.0.3 / 7" A8 512MB RAM 4GB ROM/ 4200mAh
Cube U9GT2 - Original Rom / Android 4.0.3 / 9.7" A9 1GB ROM 8GB RAM / 10000mAh
A13/Q88 - Goodix811+Mxc622x / Android 4.0.4 / 7" A13B 512MB RAM 4GB ROM / 4000mAh
Vimicro - Original Rom / Android 2.3 / 8" A8 1GB RAM 8GB ROM / 5000mAh

Offline HcH

  • TechKnow Owner, Ethical Hacker
  • Administrator
  • Uber Member
  • *****
  • Posts: 9946
  • Karma: +2285/-111
Re: [TOOL] A13 Rom Dumper
« Reply #118 on: October 07, 2012, 07:59:25 PM »
Thanks for sharing mate! :p grabbing this one ASAP :D

Offline c345y

  • Full Member
  • ***
  • Posts: 142
  • Karma: +9/-3
  • Uber-Noobie
  • Tablet / Size / Model: A13-MID/7/A13
Re: [TOOL] A13 Rom Dumper
« Reply #119 on: October 08, 2012, 03:58:04 AM »
Thanks for sharing mate! :p grabbing this one ASAP :D

Your welcome.
I hope you can make universal uberoid version for this many clone A13B Q88 tablet.  :android-lol:
WM8650 - Uberoid ROM / Green Led / Android 2.2 / 7" / 3000mAh
Ainovo Paladin - Original Rom / Android 4.0.3 / 7" A8 512MB RAM 4GB ROM/ 4200mAh
Cube U9GT2 - Original Rom / Android 4.0.3 / 9.7" A9 1GB ROM 8GB RAM / 10000mAh
A13/Q88 - Goodix811+Mxc622x / Android 4.0.4 / 7" A13B 512MB RAM 4GB ROM / 4000mAh
Vimicro - Original Rom / Android 2.3 / 8" A8 1GB RAM 8GB ROM / 5000mAh