TechKnow

Author Topic: [WINDOWS SCRIPT] AllWinner A13 Rom Dumper (Rom Backup Tool)  (Read 73698 times)

0 Members and 2 Guests are viewing this topic.

Offline opti

  • Newbie
  • *
  • Posts: 21
  • Karma: +7/-0
  • Uber-Noobie
  • Tablet / Size / Model: all winner / 7" / A13
Re: [TOOL] A13 Rom Dumper
« Reply #120 on: October 08, 2012, 11:04:36 AM »
thankyou satcomranger for the image but i still have no touchscreen, i will keep searching the net and hopefully get one eventually :-)

but i am grateful for all your efforts :-) again many thx.

Offline c345y

  • Full Member
  • ***
  • Posts: 142
  • Karma: +9/-3
  • Uber-Noobie
  • Tablet / Size / Model: A13-MID/7/A13
Re: [TOOL] A13 Rom Dumper
« Reply #121 on: October 08, 2012, 03:58:12 PM »
thankyou satcomranger for the image but i still have no touchscreen, i will keep searching the net and hopefully get one eventually :-)

but i am grateful for all your efforts :-) again many thx.

have a try this one:
http://rs66p5.rapidshare.com/cgi-bin/rsapi.cgi?sub=download&fileid=953043529&filename=eliveupdate.img&dlauth=2EC6979508C1DA63F9424C48283E2773AC
22241F7145EF8EA8C965039355F34D54C10666F7D18237E0B429A73D274A866CA63EEFF25538921B2AFE2CEB31
1246D1A880CC64006800A7D2F74587E5A86B584576D40995463AF7589B9A5873D5AFEE757F1D586512CC61294
B647C99534E


i forgot from where this firmware, i just copy paste from my download history.
« Last Edit: October 09, 2012, 03:17:26 AM by c345y »
WM8650 - Uberoid ROM / Green Led / Android 2.2 / 7" / 3000mAh
Ainovo Paladin - Original Rom / Android 4.0.3 / 7" A8 512MB RAM 4GB ROM/ 4200mAh
Cube U9GT2 - Original Rom / Android 4.0.3 / 9.7" A9 1GB ROM 8GB RAM / 10000mAh
A13/Q88 - Goodix811+Mxc622x / Android 4.0.4 / 7" A13B 512MB RAM 4GB ROM / 4000mAh
Vimicro - Original Rom / Android 2.3 / 8" A8 1GB RAM 8GB ROM / 5000mAh

Offline opti

  • Newbie
  • *
  • Posts: 21
  • Karma: +7/-0
  • Uber-Noobie
  • Tablet / Size / Model: all winner / 7" / A13
Re: [TOOL] A13 Rom Dumper
« Reply #122 on: October 08, 2012, 05:46:47 PM »
thx for the link C345y, but it jus hangs on android logo

Offline c345y

  • Full Member
  • ***
  • Posts: 142
  • Karma: +9/-3
  • Uber-Noobie
  • Tablet / Size / Model: A13-MID/7/A13
Re: [TOOL] A13 Rom Dumper
« Reply #123 on: October 09, 2012, 03:25:49 AM »
thx for the link C345y, but it jus hangs on android logo

have you try this?
http://www.maixin-china.com/software-download.asp#mx713

just try on MX713 firmware only not the other. beware brick your tablet.
there so many firmware. you should try. because so many clone for this A13
i hope you can find one that suit with your tablet.
WM8650 - Uberoid ROM / Green Led / Android 2.2 / 7" / 3000mAh
Ainovo Paladin - Original Rom / Android 4.0.3 / 7" A8 512MB RAM 4GB ROM/ 4200mAh
Cube U9GT2 - Original Rom / Android 4.0.3 / 9.7" A9 1GB ROM 8GB RAM / 10000mAh
A13/Q88 - Goodix811+Mxc622x / Android 4.0.4 / 7" A13B 512MB RAM 4GB ROM / 4000mAh
Vimicro - Original Rom / Android 2.3 / 8" A8 1GB RAM 8GB ROM / 5000mAh

Offline Manowarrior

  • Newbie
  • *
  • Posts: 5
  • Karma: +1/-0
  • Uber-Noobie
  • Tablet / Size / Model: A13MID/7/Allwinner
Re: [TOOL] A13 Rom Dumper
« Reply #124 on: October 09, 2012, 12:22:59 PM »
I would like to try it, if u don't mind uploading it that would be gr8
Thank you

done uploading,

https://hotfile.com/dl/174840906/d911cd9/goodix811mxc622x.img.html

please do give me some feedback :D hope can helps u

WOW This one worked for me,rotate,wifi,touchscreen and internal sd works brilliantly now!!!!!! THANKS :D

Offline opti

  • Newbie
  • *
  • Posts: 21
  • Karma: +7/-0
  • Uber-Noobie
  • Tablet / Size / Model: all winner / 7" / A13
Re: [TOOL] A13 Rom Dumper
« Reply #125 on: October 09, 2012, 05:36:17 PM »
Many thx for everybody in these forums, c345y i found a full working firmware on the site u linked me.
again many thx to all. :D

Offline c345y

  • Full Member
  • ***
  • Posts: 142
  • Karma: +9/-3
  • Uber-Noobie
  • Tablet / Size / Model: A13-MID/7/A13
Re: [TOOL] A13 Rom Dumper
« Reply #126 on: October 10, 2012, 03:47:14 AM »
Many thx for everybody in these forums, c345y i found a full working firmware on the site u linked me.
again many thx to all. :D
glad to hear that you found firmware suit with your tablet.  :android-batman:
WM8650 - Uberoid ROM / Green Led / Android 2.2 / 7" / 3000mAh
Ainovo Paladin - Original Rom / Android 4.0.3 / 7" A8 512MB RAM 4GB ROM/ 4200mAh
Cube U9GT2 - Original Rom / Android 4.0.3 / 9.7" A9 1GB ROM 8GB RAM / 10000mAh
A13/Q88 - Goodix811+Mxc622x / Android 4.0.4 / 7" A13B 512MB RAM 4GB ROM / 4000mAh
Vimicro - Original Rom / Android 2.3 / 8" A8 1GB RAM 8GB ROM / 5000mAh

Offline opti

  • Newbie
  • *
  • Posts: 21
  • Karma: +7/-0
  • Uber-Noobie
  • Tablet / Size / Model: all winner / 7" / A13
Re: [TOOL] A13 Rom Dumper
« Reply #127 on: October 10, 2012, 12:52:31 PM »
Thx again c345y, now its working i need to root it to break it lol :D

Offline eumario

  • Newbie
  • *
  • Posts: 21
  • Karma: +10/-0
  • Uber-Noobie
  • Tablet / Size / Model: Allwinner / 7" / A13-MID Generic Clone
Re: [TOOL] A13 Rom Dumper
« Reply #128 on: October 11, 2012, 07:11:58 AM »
opti,

If the rom you got is working for you, I would make a backup of it, and put it someplace safe, so that if you need it again, you can find it, and re-flash it.  You never know when something might happen to cause you issues.

Offline opti

  • Newbie
  • *
  • Posts: 21
  • Karma: +7/-0
  • Uber-Noobie
  • Tablet / Size / Model: all winner / 7" / A13
Re: [TOOL] A13 Rom Dumper
« Reply #129 on: October 11, 2012, 10:36:35 AM »
Quote
If the rom you got is working for you, I would make a backup of it, and put it someplace safe, so that if you need it again, you can find it, and re-flash it.  You never know when something might happen to cause you issues

for sure euromario i have it in 2 different  places  :tongue: just incase i have a hard drive failure  8-)

Offline hobbitbabes

  • Newbie
  • *
  • Posts: 29
  • Karma: +3/-0
  • i dont have none lol !!!!
  • Tablet / Size / Model: sunwinners 7" A13B MID 08
Re: [TOOL] A13 Rom Dumper
« Reply #130 on: October 13, 2012, 09:25:55 PM »
Hey ya...

i have a quick question i am planning to try some cm roms on my a13 but if this all fails i want to be able to flash back to the state its in as of now with my apps and settings an such so i dont have to mess about re-installing and setting it up again if you know what i mean??

so if i dump my tablet as it is can you make a flashable .img so i can flash back??

thanks...
The Hobbit
Allwinner A13B MID 08

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [TOOL] A13 Rom Dumper
« Reply #131 on: October 13, 2012, 10:47:07 PM »
Hey ya...

i have a quick question i am planning to try some cm roms on my a13 but if this all fails i want to be able to flash back to the state its in as of now with my apps and settings an such so i dont have to mess about re-installing and setting it up again if you know what i mean??

so if i dump my tablet as it is can you make a flashable .img so i can flash back??

thanks...

do not do it .. trying to make roms right now from a rom dump are unpredictable .. some  .. work  and some  dont...
if you want to try this be my guest

search for sausagemod  .. it is a script file that will install cwm onto you tablet item 13 .. download novotools ... this will allow you to boot in recovery .. from a working tablet .. some of these a13 will not let you in recovery with key strokes before boot .. it is hit and miss

with cwm you may be able to make a nandroid backup .. but if you cant get into it with keystrokes then it wont work as a backup tool ..
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline hobbitbabes

  • Newbie
  • *
  • Posts: 29
  • Karma: +3/-0
  • i dont have none lol !!!!
  • Tablet / Size / Model: sunwinners 7" A13B MID 08
Re: [TOOL] A13 Rom Dumper
« Reply #132 on: October 13, 2012, 11:15:52 PM »
i already have cwm installed i got a version for galaxy tab to work on it all functions work apart from the backup in cwm it hangs when backing up but it will flash as i have tried it before...i have backed up using the tool here at tech know..
just wanted to know if it was possible to make a flashable img file from the backup....
thanks
The Hobbit
Allwinner A13B MID 08

Offline 187mobstaz

  • Newbie
  • *
  • Posts: 13
  • Karma: +2/-0
  • UBER-PHIL
  • Tablet / Size / Model: A13 9.7,7",KNC 4.1 8"
Re: [TOOL] A13 Rom Dumper
« Reply #133 on: October 15, 2012, 10:45:56 AM »
Hey Can you make thise image for ELAN KTF2127 TS driver pleas, in russian forum i know 15-20 people hwo have a problem with thise stuss, and me too/



plss give me step by step to create .img file from  backup..what tools i used to compressed into one file all backup,like boot.img,bootloader.img,data.tgz,recovery.img,system.img to one .img file to flash my a13 tablet...

i back up all firmware but i can't flash,5 file backup i don't know how to...

Offline mpxresearch

  • Newbie
  • *
  • Posts: 42
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: E10 7'' Phone Call
Re: [TOOL] A13 Rom Dumper
« Reply #134 on: October 15, 2012, 03:54:39 PM »
sir i backup this rom.ca you please covert it t .img?
http://www.4shared.com/rar/LjlSxCpI/dump.html

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [TOOL] A13 Rom Dumper
« Reply #135 on: October 15, 2012, 06:03:05 PM »
sir i backup this rom.ca you please covert it t .img?
http://www.4shared.com/rar/LjlSxCpI/dump.html

I need several things answered first ...I need to know a base rom that works the best...Need some type of model number ..
Is this for a personal tablet or one that you are trying to fix for your customer? 
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline sham01_01

  • Newbie
  • *
  • Posts: 21
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: A13/7"/xpad china
Re: [TOOL] A13 Rom Dumper
« Reply #136 on: October 16, 2012, 04:09:14 AM »
Dear satcomranger,

i've problem with my mid A13 7" 8gb tablet. Before i found this site i've flashed my tablet with modrom "ployer momo9 - 4.0.4 hyper edition" which is looks like exactly the same of mine. After i flashed i got no touch screen problem, and i've try many rom from this site and other site but hve no luck. For ur info my tablet can only successful flashing with rom more than 395mb filesize. Many rom especially from this site with below than 395mb size could't get through the livesuit which is progress bar will go faster to 3% then back to 0%. At the current moment i'm trying to insmod system/vendor/modules for ts driver using A10 kitchen flash and ubuntu as u suggest from miniand. I would like to ask, can i add insmod line as many as ts driver i found or just only one driver. How the system work if i add many insmod ts driver, is it just one driver the system load at one time ? Forsure i've to check weather the driver exist in system.img. For ur info im using firmware img that successful flash to my tablet but no touch screen and extract the image using a10 kitchen flash. Hope u can help me, TQ.

Offline mpxresearch

  • Newbie
  • *
  • Posts: 42
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: E10 7'' Phone Call
Re: [TOOL] A13 Rom Dumper
« Reply #137 on: October 16, 2012, 08:43:02 AM »
sir i backup this rom.ca you please covert it t .img?
http://www.4shared.com/rar/LjlSxCpI/dump.html

I need several things answered first ...I need to know a base rom that works the best...Need some type of model number ..
Is this for a personal tablet or one that you are trying to fix for your customer?
sir this for my personal tablet.i backup rom from my friend's tablet .after backup rom i see 4 files (boot.img,bootloader.img,recovery.img,system).i can't flash my personal tablet with this 4 files.can you please convert this my backup to .img.  please sir!   Thanks.

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [TOOL] A13 Rom Dumper
« Reply #138 on: October 16, 2012, 05:47:15 PM »
mpxresearch & nightwing

YOU need to tell me which roms you have tried and TELL ME which base rom you want me to use..the rom dump is not a full system and i have to combine with a rom that IS CLOSE to your tablet ..
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [TOOL] A13 Rom Dumper
« Reply #139 on: October 16, 2012, 06:00:59 PM »
Dear satcomranger,

i've problem with my mid A13 7" 8gb tablet. Before i found this site i've flashed my tablet with modrom "ployer momo9 - 4.0.4 hyper edition" which is looks like exactly the same of mine. After i flashed i got no touch screen problem, and i've try many rom from this site and other site but hve no luck. For ur info my tablet can only successful flashing with rom more than 395mb filesize. Many rom especially from this site with below than 395mb size could't get through the livesuit which is progress bar will go faster to 3% then back to 0%. At the current moment i'm trying to insmod system/vendor/modules for ts driver using A10 kitchen flash and ubuntu as u suggest from miniand. I would like to ask, can i add insmod line as many as ts driver i found or just only one driver. How the system work if i add many insmod ts driver, is it just one driver the system load at one time ? Forsure i've to check weather the driver exist in system.img. For ur info im using firmware img that successful flash to my tablet but no touch screen and extract the image using a10 kitchen flash. Hope u can help me, TQ.

i have already created a img with every touch screen driver i could find put it in the rom and IT STILL didnt work !  Some of these tablet require one driver .. some tablets reuire the right combination of more than one driver ..i also used the ployer hyper edition and on it my rotation sensor did not work !  there are 2 hyper series  the one i used was called like hyper jelly .. the latest one wont work at all on my tablet ..
« Last Edit: October 16, 2012, 06:03:17 PM by satcomranger »
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline sham01_01

  • Newbie
  • *
  • Posts: 21
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: A13/7"/xpad china
Re: [TOOL] A13 Rom Dumper
« Reply #140 on: October 17, 2012, 02:23:42 AM »
Dear satcomranger,

. I would like to ask, can i add insmod line as many as ts driver i found or just only one driver. How the system work if i add many insmod ts driver, is it just one driver the system load at one time ? Forsure i've to check weather the driver exist in system.img. For ur info im using firmware img that successful flash to my tablet but no touch screen and extract the image using a10 kitchen flash. Hope u can help me, TQ.

i have already created a img with every touch screen driver i could find put it in the rom and IT STILL didnt work !  Some of these tablet require one driver .. some tablets reuire the right combination of more than one driver ..i also used the ployer hyper edition and on it my rotation sensor did not work !  there are 2 hyper series  the one i used was called like hyper jelly .. the latest one wont work at all on my tablet ..

I've check the ic number for touch screen on my tablet motherboard. The ic's no. is  "SSD2532 QN5" which i think the driver i should used is ssd253x-ts.ko. There is another driver i've check in system.img for "ssd" like "ssd253x-A13-ts.ko and "ssd253x-ts_66v.ko. If you came accross another driver that belong to "ssd253" chip please let me know coz i've try that 3 driver for ssd also touch screen didn't work. As you said, some tablet maybe require combination more than one driver. Is it combination with gsensor driver or another ts driver ?. Right now i can use usb mouse on that tablet, is there any application we can install so that we could check what type of driver we have. TQ.

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [TOOL] A13 Rom Dumper
« Reply #141 on: October 17, 2012, 03:25:40 AM »
Dear satcomranger,

. I would like to ask, can i add insmod line as many as ts driver i found or just only one driver. How the system work if i add many insmod ts driver, is it just one driver the system load at one time ? Forsure i've to check weather the driver exist in system.img. For ur info im using firmware img that successful flash to my tablet but no touch screen and extract the image using a10 kitchen flash. Hope u can help me, TQ.

i have already created a img with every touch screen driver i could find put it in the rom and IT STILL didnt work !  Some of these tablet require one driver .. some tablets reuire the right combination of more than one driver ..i also used the ployer hyper edition and on it my rotation sensor did not work !  there are 2 hyper series  the one i used was called like hyper jelly .. the latest one wont work at all on my tablet ..

I've check the ic number for touch screen on my tablet motherboard. The ic's no. is  "SSD2532 QN5" which i think the driver i should used is ssd253x-ts.ko. There is another driver i've check in system.img for "ssd" like "ssd253x-A13-ts.ko and "ssd253x-ts_66v.ko. If you came accross another driver that belong to "ssd253" chip please let me know coz i've try that 3 driver for ssd also touch screen didn't work. As you said, some tablet maybe require combination more than one driver. Is it combination with gsensor driver or another ts driver ?. Right now i can use usb mouse on that tablet, is there any application we can install so that we could check what type of driver we have. TQ.

try elixir2  .. there is a icon for sensors .. might tell you what u have .. i think the touch and gsensor are separte ..
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline sham01_01

  • Newbie
  • *
  • Posts: 21
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: A13/7"/xpad china
Re: [TOOL] A13 Rom Dumper
« Reply #142 on: October 17, 2012, 06:08:46 AM »
Thanks satcomranger, i'll try elixir2 and report to u.

Offline Nightwing

  • Newbie
  • *
  • Posts: 17
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: 7inch Allwinner a13 tablet
Re: [TOOL] A13 Rom Dumper
« Reply #143 on: October 17, 2012, 08:00:46 AM »
mpxresearch & nightwing

YOU need to tell me which roms you have tried and TELL ME which base rom you want me to use..the rom dump is not a full system and i have to combine with a rom that IS CLOSE to your tablet ..

Thanks YOU sir, but I've tried all of the ROM here, but surely I will find the most closed base rom for my tablet soon. And I'm reuploading a backup dump! (cuz the above dump is not for my tablet (sorry about that)) Thanks for replying! Will contact u soon :O  :tongue:

Offline mpxresearch

  • Newbie
  • *
  • Posts: 42
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: E10 7'' Phone Call
Re: [TOOL] A13 Rom Dumper
« Reply #144 on: October 17, 2012, 08:40:31 AM »
mpxresearch & nightwing

YOU need to tell me which roms you have tried and TELL ME which base rom you want me to use..the rom dump is not a full system and i have to combine with a rom that IS CLOSE to your tablet ..

Thanks for reply master!i try (sun4i_crane_t01a-6225-ctp-20120525.img).in this rom touch working but camera not working,display rotate auto,& screen some croos.this is my player.
http://jamshedpur.olx.in/orkia-portable-ok-pp555-tablet-pc-with-headphone-and-usb-cable-iid-438800495

Offline hobbitbabes

  • Newbie
  • *
  • Posts: 29
  • Karma: +3/-0
  • i dont have none lol !!!!
  • Tablet / Size / Model: sunwinners 7" A13B MID 08
Re: [TOOL] A13 Rom Dumper
« Reply #145 on: October 17, 2012, 12:43:09 PM »
Dear satcomranger,

. I would like to ask, can i add insmod line as many as ts driver i found or just only one driver. How the system work if i add many insmod ts driver, is it just one driver the system load at one time ? Forsure i've to check weather the driver exist in system.img. For ur info im using firmware img that successful flash to my tablet but no touch screen and extract the image using a10 kitchen flash. Hope u can help me, TQ.

i have already created a img with every touch screen driver i could find put it in the rom and IT STILL didnt work !  Some of these tablet require one driver .. some tablets reuire the right combination of more than one driver ..i also used the ployer hyper edition and on it my rotation sensor did not work !  there are 2 hyper series  the one i used was called like hyper jelly .. the latest one wont work at all on my tablet ..

I've check the ic number for touch screen on my tablet motherboard. The ic's no. is  "SSD2532 QN5" which i think the driver i should used is ssd253x-ts.ko. There is another driver i've check in system.img for "ssd" like "ssd253x-A13-ts.ko and "ssd253x-ts_66v.ko. If you came accross another driver that belong to "ssd253" chip please let me know coz i've try that 3 driver for ssd also touch screen didn't work. As you said, some tablet maybe require combination more than one driver. Is it combination with gsensor driver or another ts driver ?. Right now i can use usb mouse on that tablet, is there any application we can install so that we could check what type of driver we have. TQ.

try elixir2  .. there is a icon for sensors .. might tell you what u have .. i think the touch and gsensor are separte ..

If you have a mouse you can install terminal emulator  and do the following to list what drivers are loaded...

Run terminal emulator
Type "su" hit enter
Type "lsmod" hit enter

Now it should show you what driver/modules are loaded oh and do the above without quotes...

Please give thanks if I helped you :)
The Hobbit
Allwinner A13B MID 08

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [TOOL] A13 Rom Dumper
« Reply #146 on: October 17, 2012, 05:09:23 PM »
mpxresearch & nightwing

YOU need to tell me which roms you have tried and TELL ME which base rom you want me to use..the rom dump is not a full system and i have to combine with a rom that IS CLOSE to your tablet ..

Thanks for reply master!i try (sun4i_crane_t01a-6225-ctp-20120525.img).in this rom touch working but camera not working,display rotate auto,& screen some croos.this is my player.
http://jamshedpur.olx.in/orkia-portable-ok-pp555-tablet-pc-with-headphone-and-usb-cable-iid-438800495

mpxresearch

I can't believe your request !  What are you up to ???? You tried the sun4i rom listed above ..That is for an Eken T01 rom ..and A10 processor .. and you want me to make a rom that is based on an A10 and then mix it with your A13 rom dump .. I DONT THINK SO ....And you state this is for your personal tablet .. and you dont know what processor is in it and you repair tablets?????
iF YOU ARE HAVING ISSUE WITH AN a10 WHY POST IN THE A13 TOPIC!
Again .. you are trying to get us to make a rom so that you can fix a customers tablet ..we have warned you about this before ..
« Last Edit: October 17, 2012, 05:40:03 PM by satcomranger »
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [TOOL] A13 Rom Dumper
« Reply #147 on: October 17, 2012, 09:44:59 PM »
mpxresearch & nightwing

YOU need to tell me which roms you have tried and TELL ME which base rom you want me to use..the rom dump is not a full system and i have to combine with a rom that IS CLOSE to your tablet ..

Thanks YOU sir, but I've tried all of the ROM here, but surely I will find the most closed base rom for my tablet soon. And I'm reuploading a backup dump! (cuz the above dump is not for my tablet (sorry about that)) Thanks for replying! Will contact u soon :O  :tongue:

your image upload and information is located in this post .. please only use one topic from now on  since you started the other one then use that topic..
http://www.techknow.t0xic.nl/forum/index.php?topic=3684.msg42727#msg42727
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer

Offline animehq

  • Newbie
  • *
  • Posts: 15
  • Karma: +3/-0
  • Uber-Noobie
  • Tablet / Size / Model: Unknow/7"/A13
Re: [TOOL] A13 Rom Dumper
« Reply #148 on: October 18, 2012, 12:17:00 AM »
http://www.4shared.com/archive/SjUX6gjk/A13_FW_BACKUP_102012_0407.html

This is my rom dump

My tablet don't work with any of rom i have tried (touch screen for some one, gsensor for others (like A13_sun5i_android_a13-pfdq88_0613_Gsens) and finaly don't boot at all for uberdroid one's)



Offline satcomranger

  • TechKnow Co-Owner
  • Administrator
  • Uber Member
  • *****
  • Posts: 17522
  • Karma: +2173/-58
  • I'm old - But still Learning
  • Tablet / Size / Model: VIA WM8650/ 7" / Option 8 / MID-703
Re: [TOOL] A13 Rom Dumper
« Reply #149 on: October 18, 2012, 01:29:08 AM »
http://www.4shared.com/archive/SjUX6gjk/A13_FW_BACKUP_102012_0407.html

This is my rom dump

My tablet don't work with any of rom i have tried (touch screen for some one, gsensor for others (like A13_sun5i_android_a13-pfdq88_0613_Gsens) and finaly don't boot at all for uberdroid one's)

YOU must provde a base rom for me to use ..
Tab 1-Via WM8650 Option 8,Green Power/Red Charge, Black Audio - Vibrate No - 2 Point Touch Uberoid V12B2
Tab 2-Flytouch 3/Superpad 3 - Axlien (Based on Tim4e)
Tab 3-Dell Streak 7 Wifi Stock Honeycomb 3.2
Tab 4-M799CA V2.0 Running TKT3.2A
Retired Electronics Tech / Network Engineer