TechKnow

Author Topic: [ANDROID SCRIPT] WM8650 Configuration Modifier  (Read 1635 times)

0 Members and 1 Guest are viewing this topic.

Offline Stephan

  • aka HcH, TechKnow Owner, EHVSN Admin
  • Administrator
  • Uber Member
  • *****
  • Posts: 9658
  • Karma: +2279/-106
[ANDROID SCRIPT] WM8650 Configuration Modifier
« on: June 09, 2014, 12:31:48 PM »
Hello everyone,

having TS problems after flashing your tablet ?

would you wish there was a faster way to change your config, not needing to reflash the entire OS ?

CONMOD: Uberoid Configuration Modifier v1.0 by HcH

Run this from your SDCARD on your tablet using ScriptManager or HcH Sheller to modify your device configuration. This enables you to easily try out different variations of hardware configurations without needing to reflash. Perfect for situation where sound or touch screen do not work after flashing. Remember that the first thing you should do is to open up the ENV.BIN file from your SD when you flashed Uberoid with a wrong configuration set for the original settings. Make always a copy of the generated ENV .BIN file that will be written on the first Uberoid flash you perform to the SDCARD.

conmod.zip: https://www.mediafire.com/?b7kl0vi3r0rj3g3 5.03KB
hch.sheller (by robotop) https://www.mediafire.com/?28y6lqy6586l8ff 110KB

NOTE: This tool was intended to be released with Uberoid v14, due a serious issue in the firmware that release was cancelled. This tool has been tested by myself a little but I would like more feedback on experiences using this tool.

*DID YOU KNOW? The Uberizer has a interactive script launcher that allows you not only to launch scripts to your device from your computer but also to interact with the scripts by giving input for example! k/26

HcH
« Last Edit: June 17, 2016, 09:19:02 AM by HardcoreHacker »

Offline berrypunky

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: dsfgsdf
Re: [LINUX SHELL SCRIPT] WM8650 Configuration Modifier
« Reply #1 on: April 30, 2015, 06:18:51 AM »

As I read I'm not very useful here. I'm reading a very good knowledge yet.

Offline berrypunky

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
  • Uber-Noobie
  • Tablet / Size / Model: dsfgsdf
Re: [LINUX SHELL SCRIPT] WM8650 Configuration Modifier
« Reply #2 on: April 30, 2015, 06:21:01 AM »

Ah, it is all very good. I'm very easy to read. No winding it up

Offline Thierry75

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
  • Uber-Noobie
Re: [LINUX SHELL SCRIPT] WM8650 Configuration Modifier
« Reply #3 on: May 05, 2015, 05:04:11 AM »
Quelle est la manip à faire en plus de taper ces commandes..?
Merci. coque galaxy s5 etui galaxy s5
« Last Edit: May 08, 2015, 04:39:45 AM by Thierry75 »

Offline Stephan

  • aka HcH, TechKnow Owner, EHVSN Admin
  • Administrator
  • Uber Member
  • *****
  • Posts: 9658
  • Karma: +2279/-106
Re: [LINUX SHELL SCRIPT] WM8650 Configuration Modifier
« Reply #4 on: May 05, 2015, 12:31:14 PM »
Quelle est la manip à faire en plus de taper ces commandes..?
Merci.
Assez facile! Exécutez le script , entrez Q , W , E , R , T ou Y , puis un certain nombre .

Offline Toonmariya

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
  • Uber-Noobie
Re: [ANDROID SCRIPT] WM8650 Configuration Modifier
« Reply #5 on: February 07, 2018, 11:23:24 AM »
It's new knowledge for me. I have read this content, it leaves me wondering about this.