Recent Posts

Pages: [1] 2 3 4 5 6 ... 10
1
EHVSN: General Discussion
/ RULES: READ THESE FIRST
« Last post by Stephan on December 17, 2017, 12:17:01 AM »
Goodday and welcome to our forum, we have a couple of rules here to make everyone's visit a pleasure:

1. No insults
2. Respect for eachother
3. No piracy/illegal activities, we are a group of Ethical Hackers
4. Stay on topic

Enjoy your stay on the forums!

Stephan
2
/ Re: [BAT] ASCII2HEX, HEX2ASCII, HEX2BIN Converter
« Last post by Stephan on December 06, 2017, 11:39:02 PM »
Code: [Select]
@echo off
color 0a
REM ASCII Converter v1.0 by Stephan van de Kerkhof
REM ----------------------------------------------
REM Easy script to convert ASCII values to HEX or BINARY

REM Here we tell the script which conversion to perform, ASCII2HEX or ASCII2BINARY
set CONVERSIONTYPE=ASCII2BINARY

REM Set DEBUG to 1 to see more details about what's going on. Later on in the script, in specific point you want to monitor while processing you can echo if DEBUG==1.
set DEBUG=1

REM Make sure this value is empty on start, else we could have problems. Even though it's unlikely this variable has been previously used by another script or action, avoid any unneeded errors and empty it just to be sure everything goes fine.
set string=

REM %1 indicates a parameter, if none were given it will ask for a parameter using set /p later on.
set input=%1

REM If %1 is empty, no input was given while starting this script, better ask for user input else the script wouldn't do anything:
if [%1]==[] set /p input=Enter value ASCII2HEX:

REM Set a terminator character so the parser knows where to stop en/decoding ...
set input=%INPUT%]

REM Now we start parsing the input string:
:EXTRACT

REM Step 1. Extract the first character
set i=%input:~0,1%

REM Step 2. Get the ASCII value from the lookup table in this script ...
IF [%CONVERSIONTYPE%]==[ASCII2HEX] for /F "tokens=1,2,3,4,5,6 delims=;" %%a in (%~nx0) do if /i ";%%d"==";%i%" set ASCII=%%b
IF [%CONVERSIONTYPE%]==[ASCII2BINARY] for /F "tokens=1,2,3,4,5,6 delims=;" %%a in (%~nx0) do if /i ";%%d"==";%i%" set ASCII=%%c
if %DEBUG%==1 echo ascii=%ASCII%
if %DEBUG%==1 echo string1=%STRING%

REM Step 3. Add the value to the existing value in the STRING variable:
set STRING=%STRING%%ASCII%
if %DEBUG%==1 echo string2=%STRING%

REM Step 4. Remove the first character from the input string ...
set input=%input:~1%

REM Step 5. Look for our termination character, if it's found, exit the parser.
if "%input%"=="]" goto :DONE

REM Step 6. Repeat untill the termination character has been found.
goto :EXTRACT

:DONE
REM I make a new variable here, called %DECODED%, so if we call this script externally or from another script, we can use the output later on by echoing %DECODED%.
set DECODED=%STRING%
echo.&&echo Decoded: %DECODED%&&echo.
pause
goto :EOF

REM Here's the lookup table, R indicating it's a record, HEX, BINARY, ASCII values follow after that.
REM NOTE: There is a quirk: input anything with a " and the syntax fails!

R;00;00000000;
R;20;00100000;#
R;21;00100001;!
R;22;00100010;"
X;23;00100011;#
R;24;00100100;$
R;25;00100101;%
R;26;00100110;&
R;27;00100111;'
R;28;00101000;(
R;29;00101001;)
R;2B;00101011;+
R;2C;00101100;,
R;2D;00101101;-
R;2E;00101110;.
R;2F;00101111;/
R;30;00110000;0
R;31;00110001;1
R;32;00110010;2
R;33;00110011;3
R;34;00110100;4
R;35;00110101;5
R;36;00110110;6
R;37;00110111;7
R;38;00111000;8
R;39;00111001;9
R;3A;00111010;:
R;3B;00111011;;
R;40;01000000;@
R;41;01000001;A
R;42;01000010;B
R;43;01000011;C
R;44;01000100;D
R;45;01000101;E
R;46;01000110;F
R;47;01000111;G
R;48;01001000;H
R;49;01001001;I
R;4A;01001010;J
R;4B;01001011;K
R;4C;01001100;L
R;4D;01001101;M
R;4E;01001110;N
R;4F;01001111;O
R;50;01010000;P
R;51;01010001;Q
R;52;01010010;R
R;53;01010011;S
R;54;01010100;T
R;55;01010101;U
R;56;01010110;V
R;57;01010111;W
R;58;01011000;X
R;59;01011001;Y
R;5A;01011010;Z
R;5B;01011011;[
R;5C;01011100;\
R;5D;01011101;]
R;5F;01011111;_
R;61;01100001;a
R;62;01100010;b
R;63;01100011;c
R;64;01100100;d
R;65;01100101;e
R;66;01100110;f
R;67;01100111;g
R;68;01101000;h
R;69;01101001;i
R;6A;01101010;j
R;6B;01101011;k
R;6C;01101100;l
R;6D;01101101;m
R;6E;01101110;n
R;6F;01101111;o
R;70;01110000;p
R;71;01110001;q
R;72;01110010;r
R;73;01110011;s
R;74;01110100;t
R;75;01110101;u
R;76;01110110;v
R;77;01110111;w
R;78;01111000;x
R;79;01111001;y
R;7A;01111010;z
R;7B;01111011;{
R;7D;01111101;}
R;7E;01111110;~
:EOF
3
/ [BAT] Space Cadet Pinball Highscore Tablet Verification Hack
« Last post by Stephan on November 19, 2017, 12:16:53 PM »
Space Cadet Pinball Highscore Tablet Verification Hack


In order to get the highscore table to be accepted by the program, we must re-calculate the verification code in the registry.

This code is calculated by adding up all score on the table, substracting the negative values of empty highscore places, convert the highscore name to decimal values and add those to the total.

This script has the negative values of 4 empty highscore entries (-999x4=-3996), therefor it only affects the number 1 player on the chart. After that, we take all the characters of the name of the highscore table entry, and convert those characters into decimals, add those up to what we have and there is the verification code we require to validate the highscore.




@echo off
setlocal enabledelayedexpansion
color 0a

REM SPACE CADET PINBALL HIGHSCORE TABLE VERIFICATION CODE HACK BY STEPHAN VAN DE KERKHOF
REM ------------------------------------------------------------------------------------
REM In order to get the highscore table to be accepted by the program,
REM we must re-calculate the verification code in the registry. This
REM code is calculated by adding up all score on the table, substracting
REM the negative values of empty highscore places. This script has the
REM negative values of 4 empty highscore entries (-999x4=-3996), therefor
REM it only affects the number 1 player on the chart. After that, we take
REM all the characters of the name of the highscore table entry, and
REM convert those characters into decimals, add those up to what we have
REM and there is the verification code we require to validate the highscore.

echo SPACE CADET PINBALL HIGHSCORE TABLE VERIFICATION CODE HACK
echo BY STEPHAN VAN DE KERKHOF
echo.

set DEBUG=1
set TOTALASCIIVALUE=0
set string=
set /p input=Enter value High score name:
set /p input_score=Enter desired high score:
set name=%INPUT%
REM SET INPUT WITH A ']' TERMINATION CHARACTER AT THE END FOR LATER PURPOSES
set input=%INPUT%]

:EXTRACT

REM EXTRACT THE FIRST CHARACTERS
set i=%input:~0,1%

REM GET ASCII VALUE, "%~nx0" DETERMINES THE FILENAME OF THE CURRENT ACTIVE BATCH FILE
for /F "tokens=1,2,3,4,5,6 delims=;" %%a in ('type "%~nx0"') do if "R;%%c"=="R;%i%" set ASCII=%%b&&set /a TOTALASCIIVALUE=!TOTALASCIIVALUE!+!ASCII!
if %DEBUG%==1 echo ascii=%ASCII%
if %DEBUG%==1 echo string1=%STRING%
set STRING=%STRING%%ASCII%
if %DEBUG%==1 echo string2=%STRING%

REM REMOVE FIRST CHARACTER FROM INPUT
set input=%input:~1%

REM END INPUT ON TERMINATION CHARACTER
if "%input%"=="]" goto :DONE

goto :EXTRACT

:DONE

echo Converted: %STRING%
echo Total of ASCII VALUES added up: %TOTALASCIIVALUE%

REM THE VERIFICATION NUMBER IS BASICALLY A TOTAL OF ALL 5 SCORES, ASSUMING YOU HAVE NO OTHER ENTRIES IN THE HIGH SCORE TABLE IT'S GOING TO BE 4 X -999, THEREFOR CLEAR THE HIGHSCORE TABLE BEFORE USING THIS SCRIPT
set /a verification=%input_score%+%TOTALASCIIVALUE%-3996
echo RECALCULATED VERIFICATION NUMBER=%verification%
echo OVERRIDING HIGH SCORE TABLE ...

REM YEA FOR THIS PART DELAYED EXPANSION WILL CONFLICT WITH THE EXCLAMATION MARK IN THE REGISTRY KEY NAME, DISABLE IT
setlocal disabledelayedexpansion
reg add HKCU\Software\Microsoft\Plus^!\Pinball\SpaceCadet /v 0.Name /d %name% /f
reg add HKCU\Software\Microsoft\Plus^!\Pinball\SpaceCadet /v 0.Score /d %input_score% /f
reg add HKCU\Software\Microsoft\Plus^!\Pinball\SpaceCadet /v Verification /d %verification% /f
echo Done.

pause
goto :EOF

REM ASCII VALUE CONVERSION TABLE
R;32;
R;45;-
R;46;.
R;64;@
R;95;_
R;48;0
R;49;1
R;50;2
R;51;3
R;52;4
R;53;5
R;54;6
R;55;7
R;56;8
R;57;9
R;65;A
R;66;B
R;67;C
R;68;D
R;69;E
R;70;F
R;71;G
R;72;H
R;73;I
R;74;J
R;75;K
R;76;L
R;77;M
R;78;N
R;79;O
R;80;P
R;81;Q
R;82;R
R;83;S
R;84;T
R;85;U
R;86;V
R;87;W
R;88;X
R;89;Y
R;90;Z
R;97;a
R;98;b
R;99;c
R;100;d
R;101;e
R;102;f
R;103;g
R;104;h
R;105;i
R;106;j
R;107;k
R;108;l
R;109;m
R;110;n
R;111;o
R;112;p
R;113;q
R;114;r
R;115;s
R;116;t
R;117;u
R;118;v
R;119;w
R;120;x
R;121;y
R;122;z
:EOF

Code: [Select]
@echo off
setlocal enabledelayedexpansion
color 0a

REM SPACE CADET PINBALL HIGHSCORE TABLE VERIFICATION CODE HACK BY STEPHAN VAN DE KERKHOF
REM ------------------------------------------------------------------------------------
REM In order to get the highscore table to be accepted by the program,
REM we must re-calculate the verification code in the registry. This
REM code is calculated by adding up all score on the table, substracting
REM the negative values of empty highscore places. This script has the
REM negative values of 4 empty highscore entries (-999x4=-3996), therefor
REM it only affects the number 1 player on the chart. After that, we take
REM all the characters of the name of the highscore table entry, and
REM convert those characters into decimals, add those up to what we have
REM and there is the verification code we require to validate the highscore.

echo SPACE CADET PINBALL HIGHSCORE TABLE VERIFICATION CODE HACK
echo BY STEPHAN VAN DE KERKHOF
echo.

set DEBUG=1
set TOTALASCIIVALUE=0
set string=
set /p input=Enter value High score name:
set /p input_score=Enter desired high score:
set name=%INPUT%
REM SET INPUT WITH A ']' TERMINATION CHARACTER AT THE END FOR LATER PURPOSES
set input=%INPUT%]

:EXTRACT

REM EXTRACT THE FIRST CHARACTERS
set i=%input:~0,1%

REM GET ASCII VALUE, "%~nx0" DETERMINES THE FILENAME OF THE CURRENT ACTIVE BATCH FILE
for /F "tokens=1,2,3,4,5,6 delims=;" %%a in ('type "%~nx0"') do if "R;%%c"=="R;%i%" set ASCII=%%b&&set /a TOTALASCIIVALUE=!TOTALASCIIVALUE!+!ASCII!
if %DEBUG%==1 echo ascii=%ASCII%
if %DEBUG%==1 echo string1=%STRING%
set STRING=%STRING%%ASCII%
if %DEBUG%==1 echo string2=%STRING%

REM REMOVE FIRST CHARACTER FROM INPUT
set input=%input:~1%

REM END INPUT ON TERMINATION CHARACTER
if "%input%"=="]" goto :DONE

goto :EXTRACT

:DONE

echo Converted: %STRING%
echo Total of ASCII VALUES added up: %TOTALASCIIVALUE%

REM THE VERIFICATION NUMBER IS BASICALLY A TOTAL OF ALL 5 SCORES, ASSUMING YOU HAVE NO OTHER ENTRIES IN THE HIGH SCORE TABLE IT'S GOING TO BE 4 X -999, THEREFOR CLEAR THE HIGHSCORE TABLE BEFORE USING THIS SCRIPT
set /a verification=%input_score%+%TOTALASCIIVALUE%-3996
echo RECALCULATED VERIFICATION NUMBER=%verification%
echo OVERRIDING HIGH SCORE TABLE ...

REM YEA FOR THIS PART DELAYED EXPANSION WILL CONFLICT WITH THE EXCLAMATION MARK IN THE REGISTRY KEY NAME, DISABLE IT
setlocal disabledelayedexpansion
reg add HKCU\Software\Microsoft\Plus^!\Pinball\SpaceCadet /v 0.Name /d %name% /f
reg add HKCU\Software\Microsoft\Plus^!\Pinball\SpaceCadet /v 0.Score /d %input_score% /f
reg add HKCU\Software\Microsoft\Plus^!\Pinball\SpaceCadet /v Verification /d %verification% /f
echo Done.

pause
goto :EOF

REM ASCII VALUE CONVERSION TABLE
R;32;
R;45;-
R;46;.
R;64;@
R;95;_
R;48;0
R;49;1
R;50;2
R;51;3
R;52;4
R;53;5
R;54;6
R;55;7
R;56;8
R;57;9
R;65;A
R;66;B
R;67;C
R;68;D
R;69;E
R;70;F
R;71;G
R;72;H
R;73;I
R;74;J
R;75;K
R;76;L
R;77;M
R;78;N
R;79;O
R;80;P
R;81;Q
R;82;R
R;83;S
R;84;T
R;85;U
R;86;V
R;87;W
R;88;X
R;89;Y
R;90;Z
R;97;a
R;98;b
R;99;c
R;100;d
R;101;e
R;102;f
R;103;g
R;104;h
R;105;i
R;106;j
R;107;k
R;108;l
R;109;m
R;110;n
R;111;o
R;112;p
R;113;q
R;114;r
R;115;s
R;116;t
R;117;u
R;118;v
R;119;w
R;120;x
R;121;y
R;122;z
:EOF
4
/ [C++] Random CD-Key Generator Example
« Last post by Stephan on October 30, 2017, 08:23:17 PM »
[C++] Random CD-Key Generator Example


Compiler: CodeBlocks (download for free: http://codeblocks.org/downloads)
Description: A simple example of randomizing characters and output in a certain format in C++.

Code:
#include <iostream>
#include <string>
#include <cstdlib>
#include <ctime>

using namespace std;

static const char alphanum[] =
"0123456789"
"ABCDEFGHIJKLMNOPQRSTUVWXYZ"
;

int stringLength = sizeof(alphanum) - 1;

char genRandom()
{
    return alphanum[rand() % stringLength];
}

int main()
{
    srand(time(0));
    std::string Str;
    for(unsigned int i = 0; i < 25; ++i)
    {
    Str += genRandom();
    }
    //cout << Str << endl;
    cout << Str.substr(0, 5) << '-' << Str.substr(5, 5) << '-' << Str.substr(10, 5) << '-' << Str.substr(15, 5) << '-' << Str.substr(20, 5) << endl;
}

Code: (random_cdkey_generator_example's main.cpp) [Select]
#include <iostream>
#include <string>
#include <cstdlib>
#include <ctime>
using namespace std;

static const char alphanum[] =
"0123456789"
"ABCDEFGHIJKLMNOPQRSTUVWXYZ";

int stringLength = sizeof(alphanum) - 1;

char genRandom()
{
    return alphanum[rand() % stringLength];
}

int main()
{
    srand(time(0));
    std::string Str;
    for(unsigned int i = 0; i < 25; ++i)
    {
    Str += genRandom();
    }
    //cout << Str << endl;
    cout << Str.substr(0, 5) << '-' << Str.substr(5, 5) << '-' << Str.substr(10, 5) << '-' << Str.substr(15, 5) << '-' << Str.substr(20, 5) << endl;
}
5
I like this way of thinking is very high.
6
/ [PYTHON] Cross-Platform Network Scanner v1.0
« Last post by Stephan on October 15, 2017, 01:21:03 AM »

Cross-Platform Network Scanner v1.0

Release date: 20171015
Type: Python 2.7 system ping / TCP network scanner script
Description: Network scanner, determines it's own currect network, makes a range of network addresses to scan, utilises system (linux/windows) ping and performs TCP portscans. No need for parameters on this one, or code modifications, just run it! Easy to modify to your own needs, such as the ports/protocols to scan for. Tested on Windows and Raspbian.


Introductie:

Beste lezer,

in deze les leert u hoe we met een Raspberry Pi een netwerk kunnen scannen. De les is bedoeld voor zowel beginners als gevorderden. We beginnen bij het begin, wat is een netwerk? Een netwerk is een systeem waarover o.a. computers communiceren. Het internet is daar een goed voorbeeld van. Niet veel mensen weten dat internet staat voor ‘interconnected computer networks’, de werking van internet is dan ook nagenoeg hetzelfde als van een lokaal netwerk. Wanneer we een netwerk betreden en we geen kennis hebben van waar welke apparaten/servers/services aanwezig zijn, kunnen we met een scanner om ons heen kijken in een netwerk. Er zijn vele scanners, maar wat doet een scanner nou eigenlijk?

Een scanner kijkt of er apparaten op het netwerk zijn, vroeger was een ping rond het netwerk eigenlijk voldoende, maar tegenwoordig zijn er veel apparaten standaard in stealth mode, wat alleen maar inhoud dat ze niet reageren op een ICMP (ping) aanvraag. Dat wil nog niet zeggen dat we het apparaat niet kunnen ontdekken, door een TCP verbinding te openen op veelvoorkomende communicatie poorten zoals 80 voor HTTP, 21 voor FTP en 23 voor Telnet kunnen we zien dat een apparaat antwoord, en daarom aanwezig is op het netwerk. In sommige gevallen kan men eenvoudig toegang krijgen vervolgens. Een bereik van het netwerk is in de meeste gevallen de eerste 3 octetten van het ipv4 host adres van 1-254 (bijvoorbeeld 192.168.10.1 - 192.168.10.254). Tenzij er sprake is van 1 of meerdere VLANs, dan krijgen we bijvoorbeeld ook 192.168.11.1-254 maar dat slaan we voor nu even over.

In Python kunnen we eigenlijk vrij eenvoudig een scanner maken. Omdat ping nog niet uitgesloten is en soms nog effectief keuren we die ontdekkingsmethode nog niet af, daarnaast scannen we de veelgebruikte poorten op TCP. Het zou makkelijk zijn als de scanner zelf de scanrange kan bepalen, met name scripted scanners hebben veelal allerlei input nodig van de gebruiker, het zou mooier zijn als onze scanner het zelf kan bepalen.


Source:

#Cross-Platform Network Scanner v1.0 by HcH
#Network scanner based on system ping and TCP scanning, tested on Windows/Raspbian

#returning the system/OS name can be done using platform

from platform import system as system_name
#for executing shell commands we import system
from os import system as system_call
#for gethostname function we need socket
import socket

#get the range of the scan based off the host ip address that's able to communicate to the internet
#it returns a join with rpartition, it splits the string at the last occurrence of the argument string so the last octet of the ipv4 address is removed
def get_scanrange():
    s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
    s.connect(("8.8.8.8", 80))
    return ''.join(s.getsockname()[0].rpartition('.')[:2])

#a scanrange will look like 10.0.0. , the for loop will fill in 1-254 for us at the last octet of the ipv4 address
network = str(get_scanrange())

#ping as system call function, for windows and linux!
def ping(host):
    #ping parameters depending on OS
    parameters = "-n 1 -w 3" if system_name().lower()=="windows" else "-c 1"
    #the ping command itself
    return system_call("ping " + parameters + " " + host + ">NUL") == 0

#scannerplugin example, tries to connect to webservers
def http(ipaddr):
    s = socket(AF_INET, SOCK_STREAM)
    s.settimeout(0.3)
    if not s.connect_ex((ipaddr,80)):
        s.close()                     
        return 1
    else:
        s.close()

#scannerplugin example, tries to connect to ftpservers
def ftp(ipaddr):
    s = socket(AF_INET, SOCK_STREAM)
    s.settimeout(0.3)
    if not s.connect_ex((ipaddr,21)):
        s.close()                     
        return 1
    else:
        s.close()

#scannerplugin example, tries to connect to telnetservers
def telnet(ipaddr):
    s = socket(AF_INET, SOCK_STREAM)
    s.settimeout(0.3)
    if not s.connect_ex((ipaddr,23)):
        s.close()                     
        return 1
    else:
        s.close()

#to obtain getfqdn function we now import from socket:
from socket import *

def run():
    print ''
    #ping addresses <network>.1 to <network>.254
    for ip in xrange(1,254):
        ipaddr = network + str(ip)
        #the function 'getfqdn' returns the remote hostname, add it easily to a 1 line output
        if ping(ipaddr):
            print '%s \t ::: \t PING  \t ::: \t %s' %(ipaddr, getfqdn(ipaddr))
        if ftp(ipaddr):
            print '%s \t ::: \t FTP   \t ::: \t %s' %(ipaddr, getfqdn(ipaddr))
        if telnet(ipaddr):
            print '%s \t ::: \t TNET  \t ::: \t %s' %(ipaddr, getfqdn(ipaddr))
        if http(ipaddr):
            print '%s \t ::: \t HTTP  \t ::: \t %s' %(ipaddr, getfqdn(ipaddr))

#here's the main:
if __name__ == '__main__':
    print '\n' + 'Cross-Platform Network Scanner v1.0' + '\n' + '\n' + 'Scanning ' + network + '1-254 ...'
    run()
    raw_input('\n' + 'Done')

Download: registered members can download attachments of this post.
7
/ Re: NEW AD-FREE DOWNLOAD LOCATION
« Last post by Stephan on September 11, 2017, 10:22:40 AM »
Hi,
I am a newbie here and sincerely need you guys help! I bought some android netbooks (10") with model hl-pc1088 for resale, unfortunately 5 of the netbooks are having issues (freeze on booting), I have searched everywhere for its firmware, only saw the wm version and uberoid universal doesnt contain the model number also.
I will be very grateful if anybody can direct me to the suitable download link
Thanks in advance
Note: I have tried most of the wms firmwares i saw online but the thing will just went blank instead of loading the files on the sd card
re-uploading ... can I email you the new link?

HcH
8
/ Re: [WM8850] Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Last post by Stephan on September 11, 2017, 09:39:00 AM »
Hi,
I am a newbie here and sincerely need you guys help! I bought some android netbooks (10") with model hl-pc1088 for resale, unfortunately 5 of the netbooks are having issues (freeze on booting), I have searched everywhere for its firmware, only saw the wm version and uberoid universal doesnt contain the model number also.
I will be very grateful if anybody can direct me to the suitable download link
Thanks in advance
Note: I have tried most of the wms firmwares i saw online but the thing will just went blank instead of loading the files on the sd card
Hello lordzeus,

I can upload the ROMs for you, can I send you a email with the download links?

HcH
9
/ Re: [WM8850] Universal Uberoid v3.1 JB 4.1.1 22NOV2013
« Last post by lordzeus on September 08, 2017, 08:58:56 AM »
Hi,
I am a newbie here and sincerely need you guys help! I bought some android netbooks (10") with model hl-pc1088 for resale, unfortunately 5 of the netbooks are having issues (freeze on booting), I have searched everywhere for its firmware, only saw the wm version and uberoid universal doesnt contain the model number also.
I will be very grateful if anybody can direct me to the suitable download link
Thanks in advance
Note: I have tried most of the wms firmwares i saw online but the thing will just went blank instead of loading the files on the sd card
10
/ Re: NEW AD-FREE DOWNLOAD LOCATION
« Last post by lordzeus on September 08, 2017, 03:39:44 AM »
Hi,
I am a newbie here and sincerely need you guys help! I bought some android netbooks (10") with model hl-pc1088 for resale, unfortunately 5 of the netbooks are having issues (freeze on booting), I have searched everywhere for its firmware, only saw the wm version and uberoid universal doesnt contain the model number also.
I will be very grateful if anybody can direct me to the suitable download link
Thanks in advance
Note: I have tried most of the wms firmwares i saw online but the thing will just went blank instead of loading the files on the sd card
Pages: [1] 2 3 4 5 6 ... 10
Powered by EzPortal